Finally I can share...My Special Project: Lajosi JS8 Damascus
- Thread starter
- Staff
- #102
Nah, I've actually managed to not get any bigger since I sold off a couple here and there.
Plus, there's plenty of wall space in the man-cave lol
Thanks all, I'm on a MAJOR flow neck kick right now and Kari delivered on what I asked for. These two have been months in the process/making so I can;t wait to see the finished products. Kari is a magician with what he can do.
Singlestick
New member
fair play that issome stunning custom putterage right there. Fabulous.
So what sort of finish is the damascus? Looked acid dipped or something? Brilliant stuff.
Is the finish weather resistant at all or might you have to oil it every now and then to stop it rusting?
So what sort of finish is the damascus? Looked acid dipped or something? Brilliant stuff.
Is the finish weather resistant at all or might you have to oil it every now and then to stop it rusting?
- Thread starter
- Staff
- #105
Yep, the Damascus is acid "etched". I'll have to give it a good wipedown with a silicon cloth now and again, not a biggie though.
Sent from my iPhone using Tapatalk
- Thread starter
- Staff
- #106
Well, the Damascus is finally coming home as her sister is done and ready to head home as well. Need to share some pics of the JS8 Flow-Neck finished in gunmetal.
- Thread starter
- Staff
- #108
Well, here's some eye-candy for you all. I waited to take the pics until today when I had plenty of light to really show them off.
As usual I cannot say enough about Kari's work and this new JS8 head style is incredibly good looking, its got that meaty flange for the mid-mallet guys like myself but still retains the wonderful hit-to curvature. The Damascus CS was finished with a UST FF shaft and Tour Roo Gripmaster and the Flow-Neck was finished with a standard shaft and Tour Roo Gripmaster as well. Both are 6365g's with a 68* lie angle as well.
There's a reason that all non T.P. Mills and Kari Lajos putters will be leaving my collection, craftsmanship and unparalleled customer service like these two companies put out is all that a golfer could ever need, end of discussion.
Here's to bringing the sexiness in these pictures.
As usual I cannot say enough about Kari's work and this new JS8 head style is incredibly good looking, its got that meaty flange for the mid-mallet guys like myself but still retains the wonderful hit-to curvature. The Damascus CS was finished with a UST FF shaft and Tour Roo Gripmaster and the Flow-Neck was finished with a standard shaft and Tour Roo Gripmaster as well. Both are 6365g's with a 68* lie angle as well.
There's a reason that all non T.P. Mills and Kari Lajos putters will be leaving my collection, craftsmanship and unparalleled customer service like these two companies put out is all that a golfer could ever need, end of discussion.
Here's to bringing the sexiness in these pictures.
Super Tuna
You can't scale this!
Is that a Kangaroo on the grip as well? Fantastic!
The next club I get is going to be the custom lizard scheme Kari came up with for me. It departs from my fishy bag but I'm sure they can suck it up (fishy head covers. Shark, Dolphin and Lobster are the current occupants).
Kari did an awesome job with these mate.
The next club I get is going to be the custom lizard scheme Kari came up with for me. It departs from my fishy bag but I'm sure they can suck it up (fishy head covers. Shark, Dolphin and Lobster are the current occupants).
Kari did an awesome job with these mate.
d_in_la
Not so in LA.
jeeeeeeeeeeez. Those things are beeee-yoooo-tiful! We somehow need to get you in front of Quintin Tarantino so he can write those putters into his next movie.
Chadwaa
New member
Looks clean - I still would prefer my Scotty Cameron though.
- Thread starter
- Staff
- #112
Yeah, the little Kangaroo's are new compared to my other Roo grips, I like it alot!
Thanks ST!
Thank you sir, I'm pretty taken by them too.
Um, ok, why comment in my thread then? I'm really trying very hard here not to go too far with this but that just goes all over me.
I'll leave it at this so as not to get into any trouble. That's you're loss, enjoy your scooter.
coolbreeze
Aspiring Golferr
Well done Jman! I'm proud of your restraint. On the putters though, DUDE! Just sick man, just beautiful thats all I can.
sangoram
Architectonically tuned
really nice. It's cool to have someone custom make you what you want... Time to play with CAD
McKillian
New member
- Joined
- Sep 30, 2010
- Messages
- 871
- Reaction score
- 1
- Handicap
- 13,9
That´s just pure Golf-porn right there!!
One of these days I´d like to custom order a putter of my own.
One of these days I´d like to custom order a putter of my own.
- Thread starter
- Staff
- #117
Thanks CB...on both counts. I was on the brink of letting it rip there, still really want to. **deep breath** I think they came out ridiculously nice, could not be happier.
Haha, thanks buddy. I'll hook you up tonight, need to do it before some of them find new homes anyways.
I wish I could use CAD, just so intriguing to me. Thanks for the comments!!
Haha, thank you. All I'll say is they are a gateway drug, so be prepared when you do take the plunge. There are some great putter makers out there, and to me Kari is way up there.
Buckjob
My Friend's Call Me Drew
WOW Jman those are 2 of the nicest putters i've ever seen. let me know when you get sick of staring at them all day and ill buy them from you! lol
- Thread starter
- Staff
- #119
Thanks tremendously for the kinds comments Buck, but, the T.P. Mills putters and the Lajosi's are the only ones I can promise you I'll never get rid of....hehehehe
- Thread starter
- Staff
- #121
Shoot away, I never mind some putter talk. lol
lcsmrtn
New member
Those are awesome, that damascus steel is just so cool and so unique!! Congrats on both!
- Thread starter
- Staff
- #123
Thanks very much, I can safely say the damascus also has a feel to it unlike anything else. Its hard to explain but with a few days with it on the putting green when it comes in I'll sure as hell try.
- Moderator
- #124
haha that feel is the butterflies of a man in love!!!