We've launched the new forums! Read more here

FS:Ping G15 irons w/ C-Tapers, Cleveland Mashie TM3 and M4, Scotty Cameron Squareback

Schweitzer_07

Schweitzer_07

Active member
Joined
Apr 17, 2010
Messages
1,295
Reaction score
5
Location
Tennessee
This sale shall be known as the "my wife won't let me buy new clubs until the old ones are gone" sale. (All items RH)

For your viewing pleasure is a set of 4-U Ping G15 irons with KBS C-Taper shafts (S Flex). They are black dot, but have been altered some. They play 1/4" over standard (38" 5 iron) and 2 degrees upright. They have brand new white Golf Pride VDR's and have been extremely well taken care of. The PGA value guide had the resale value at $350 without the upgraded shafts and grips, so I'll say --SOLD--.

Second item up is a Cleveland Mashie M4. It has the 59X shaft (X-flex) and comes with stock grip and headcover. Has seen very little action as it had way too much of the lefts for me. Let's go with --SOLD-- shipped as it isn't doing me any good sitting in my spare bag.

http://imageshack.us/photo/my-images/41/clevelandmashie4.jpg/
http://imageshack.us/photo/my-images/827/clevelandmashie44.jpg/
http://imageshack.us/photo/my-images/843/clevelandmashie42.jpg/
http://imageshack.us/photo/my-images/576/clevelandmashie43.jpg/

Third item is a Cleveland Mashie Tour M3. It has seen more action than the M4, but still in really good shape. Has the 83S (stiff) shaft and a new Golf Pride Tour Velvet grip. Also comes with headcover. Let's go with --SOLD--.

Last item is one that is hard for me to see go. It is a Scotty Cameron Squareback No. 1 that has a custom Orange/White paintfill. It has been used off and on for the past couple of seasons but is in relatively good shape. I had the guy I bought it from do the paintfill, but as I've learned here, you can customize your paintfill however you like really. It plays at 35" and has the red Baby T grip and stock headcover (though in the principle of full disclosure, the headcover looks somewhat faded from the sun). I'll go --SOLD-- shipped.

http://imageshack.us/photo/my-images/401/scottycameron.jpg/
http://imageshack.us/photo/my-images/689/scottycameron3.jpg/
http://imageshack.us/photo/my-images/84/scottycameron2.jpg/
http://imageshack.us/photo/my-images/254/scottycameron5.jpg/
http://imageshack.us/photo/my-images/856/scottycameron4.jpg/
http://imageshack.us/photo/my-images/862/scottycameron6.jpg/
http://imageshack.us/photo/my-images/819/scottycameron7.jpg/

ALL ITEMS SOLD!
 
Last edited:
GLWS. I have been eying a TM3 for a long time, and you are making it hard not to bite.
 
Thanks JR!

Anyone have help on how I embed the pictures in rather than just post the links? I'm sure that would make viewing much easier!
 
Good stuff there. GLWS!
 
Use this tag around each link.
Schweitzer_07 said:
Thanks JR!

Anyone have help on how I embed the pictures in rather than just post the links? I'm sure that would make viewing much easier!
Click to expand...
 
Bump for anyone interested.
 
Good stuff there, with those shafts the irons are a steal! GLWS
 
Apparently my work doesnt like imageshack
 
Those are beautiful! Good luck with the sale.
 
Did those C-tapers lower the ball flight for you on the G15's?
 
Sooner21 said:
Did those C-tapers lower the ball flight for you on the G15's?
Click to expand...

If I would have went with the right flex (I apparently need at least S+) then I have no doubt it would have accomplished that. The S flex was about the same as the S300's. They felt incredible, especially to feel them kick through the ball at impact, but I need a more stout shaft. The feel compared to the S300's I had in them was night and day though.

If you have any more questions feel free to PM me. I'll answer whatever questions you have.
 
would you ship to Canada at all?
 
Renren89 said:
would you ship to Canada at all?
Click to expand...

Any idea what the difference in price would be? I assumed between 10-20 USD depending on where it was going.
 
Schweitzer_07 said:
Any idea what the difference in price would be? I assumed between 10-20 USD depending on where it was going.
Click to expand...

It can be a lot. I spent $60 shipping a driver to Canada...ridiculous
 
Its not that much more expensive as long as you use USPS and you choose the cheapest option of getting there, which means it can take a long long time, but at least at a resonable price.
 
coolbreeze said:
Its not that much more expensive as long as you use USPS and you choose the cheapest option of getting there, which means it can take a long long time, but at least at a resonable price.
Click to expand...
Yeah I'm not sure on the exact price but it should be around $25-30. Would be going to Lethbridge, Alberta
What I'm interested in is the putter.
 
coolbreeze said:
Its not that much more expensive as long as you use USPS and you choose the cheapest option of getting there, which means it can take a long long time, but at least at a resonable price.
Click to expand...

If the cost is not excessive I definitely wouldn't be opposed to working it out.
 
Bump for anyone interested. Would like to get these items sold.

Will also be adding my Cleveland Staff Bag (same as the one the MC'ers are getting) after work tonight (in a different thread of course).
 
The orange and white paintfill makes the putter tempting. VolNation! GLWS.
 
Thanks, Josh. Hopefully this next season treats us better!

Anyone that would be interested in trading a Taylormade Rescue 11 21* for either mashie? I can add cash if necessary.
 
Dropped prices on items and marked the TM3 as sold.
 
Last edited:
Dropped prices again... would really like to move these items as soon as possible. I think the prices are competetive, but if not feel free to let me know.
 
You must log in or register to reply here.
Back
Top