R11 Adapter Removal?

[Bogey317]

I need to pull a TM adapter off of a shaft. Is it possible, and do I just carefully heat it just like the head of a club?

 

[Super Tuna]

I need to pull a TM adapter off of a shaft. Is it possible, and do I just carefully heat it just like the head of a club?

Pretty much.
Don't try this with a Cobra adapter for the record though

 

[Oregon Golfer]

Wouldn't you want to use an extractor to make sure it's pulled exactly straight off to avoid damaging the shaft?

 

[Bogey317]

Wouldn't you want to use an extractor to make sure it's pulled exactly straight off to avoid damaging the shaft?

Thats a given, but you still have to heat it to use an extractor......

 

[CS]

When I pulled mine the heat softened the plastic on the tip and the extractor completely ruined it.

 

[BigCountryStein]

I had an adapter pulled off of my old Harrison Pro 2.5 driver shaft and the plastic bit melted but you it's still useable, or so the guy at GolfTown says.

 

[JF]

I'm going to be taking my Speeder off my FT-i soon and putting it in the supertri to see how it goes. If I later want to put that shaft back in the FT-i it would likely ruin the R9 tip then right, but the shaft would still be good?