rx evolution
Results 1 to 5 of 5

Thread: Wrenches for adjustable drivers...

  1. #1
    Major Champion Rusty's Avatar
    Join Date
    Nov 2011
    Location
    Atlanta
    Posts
    1,344
    Member
    8466
    Handicap
    8
    Thanks
    3
    Thanked 2 Times in 2 Posts

    Wrenches for adjustable drivers...

    I tried to do a search for this topic, but I wasn't even sure what to look for. I am basically curious if one can use a torque wrench from one OEM to adjust a club from a different OEM? I can't find the wrench specs anywhere.

    Specifically, I picked up a Razr Fit off the pre-owned rack, but PGA SS would not give me a wrench with it (they offered to sell me one, but they were going to order it). The adjustment screws all have torx heads, and it turns out they are the same size as the Titleist 910 clubs, or at least close enough to the same size that the Titleist wrench works. But I was curious if the Titleist wrench would apply the same torque as the Callaway wrench? If its too loose, the club might fall apart; too tight and I could be messing up the screw threads.
    In the XLT-15 Bag:

    Big Bertha (2014)
    X2 Hot 3 and 5 Woods
    X2 Hot 4 and 5 Hybrids
    I25 6-P irons
    Vokey SM4 wedges, 50, 54, 58
    Karsten TR B60

  2. #2
    #TeamCallaway HoosierGolfer's Avatar
    Join Date
    Nov 2009
    Location
    East Central Indiana
    Posts
    14,631
    Member
    1091
    Handicap
    10.1
    Thanks
    696
    Thanked 1,505 Times in 1,123 Posts
    Quote Originally Posted by Rusty View Post
    I tried to do a search for this topic, but I wasn't even sure what to look for. I am basically curious if one can use a torque wrench from one OEM to adjust a club from a different OEM? I can't find the wrench specs anywhere.

    Specifically, I picked up a Razr Fit off the pre-owned rack, but PGA SS would not give me a wrench with it (they offered to sell me one, but they were going to order it). The adjustment screws all have torx heads, and it turns out they are the same size as the Titleist 910 clubs, or at least close enough to the same size that the Titleist wrench works. But I was curious if the Titleist wrench would apply the same torque as the Callaway wrench? If its too loose, the club might fall apart; too tight and I could be messing up the screw threads.
    I'm guessing they may all have they're own spec's as far as torque goes. To be safe, it might be best to buy the correct wrench.

    Driver: XR 12* @ 44"
    3 Wood: XR 15* @ 43"
    5 Wood: XR 19* @ 42"
    4 Hybrid: XR 22*
    5 Hybrid: XR 25*
    Irons: XR 7 thru 9
    Wedges: XR 44* & 49* & 54* and Mack Daddy PM Grind 58*
    Ball: HEX Warbird Yellow
    Putter: Versa #1 White w/Super Stroke 3.0


  3. #3
    Major Champion Rusty's Avatar
    Join Date
    Nov 2011
    Location
    Atlanta
    Posts
    1,344
    Member
    8466
    Handicap
    8
    Thanks
    3
    Thanked 2 Times in 2 Posts
    Quote Originally Posted by HoosierGolfer View Post
    I'm guessing they may all have they're own spec's as far as torque goes. To be safe, it might be best to buy the correct wrench.
    That's why I'm asking: to see if anyone actually knows.
    In the XLT-15 Bag:

    Big Bertha (2014)
    X2 Hot 3 and 5 Woods
    X2 Hot 4 and 5 Hybrids
    I25 6-P irons
    Vokey SM4 wedges, 50, 54, 58
    Karsten TR B60

  4. #4
    Beginner
    Join Date
    Sep 2009
    Location
    Saskatoon, Saskatchewan, Canada
    Posts
    32
    Member
    812
    Handicap
    12
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i work at golftown here in canada. i do not know what the torque is on callaway vs titliest wrenches. however i do know that the old yellow taylormade wrenches for the r7 line up torqued to 30 pounds. the new r9-r11 wrenches torque to 40 pounds. probably best to get the proper wrench. especially if there is any warrenty issues
    In my 3.5 stand bag

    Driver: i20 10.5 driver
    3 Wood: i20 3 wood
    Hybrid: i20 20' hybrid
    Irons: i20 irons 4-AW KBS Tour stiff
    Wedges: Vokey Spin Milled Satin 56 and 60
    Putter: Del Mar California

  5. #5
    Major Champion Rusty's Avatar
    Join Date
    Nov 2011
    Location
    Atlanta
    Posts
    1,344
    Member
    8466
    Handicap
    8
    Thanks
    3
    Thanked 2 Times in 2 Posts
    I decided this shouldn't be so hard to figure out. I stuck my Titleist wrench in the Callaway hosel bolt and tried to tighten it. The Titleist wrench popped and wouldn't tighten the bolt, so obviously the Callaway bolt was at or above the max torque for the Titleist wrench. Then I loosened the bolt about a quarter turn, and tightened it back. It appeared to go back to the same spot before the wrench stopped tightening....maybe went a miniscule amount past the original location, but I cannot imagine that will damage the threads or otherwise compromise the club. I'm satisfied that I can use my Titleist wrench with the Razr Fit, but I think I just got lucky. I will keep my eyes open for a cheap Callaway wrench.
    In the XLT-15 Bag:

    Big Bertha (2014)
    X2 Hot 3 and 5 Woods
    X2 Hot 4 and 5 Hybrids
    I25 6-P irons
    Vokey SM4 wedges, 50, 54, 58
    Karsten TR B60

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •