Acey 263 Wedge Review: 3D Printing Gets Weird, Then Surprisingly Normal

There’s no shortage of small golf companies trying to do something different, but Acey Golf has at least found a way to make you stop and look twice. 

The Acey 263 wedge is 3D printed from 316L stainless steel and features an open lattice structure across the back of the head. Visually, it looks more like something pulled from an engineering lab than a traditional wedge rack. That makes sense, because the entire point of the 263 is to use additive manufacturing to create structures that would be difficult or impossible to achieve through conventional casting or forging. Acey says the design allows it to redistribute mass, increase stability and move the sweet spot closer to the center of the face. 

We’ve spent time with 45° and 55° versions both on the course and indoors on SkyTrak Max. Our testing allowed us to get a feel for what the 263 actually is. The biggest surprise is that, once you stop staring at the back of the head, it plays much more like a familiar cavity-back wedge than some futuristic experiment. 

Acey 263 Wedge

There’s Real Golf Equipment Experience Behind Acey 

Acey Golf may be a new name, but founder Andy Chick has been around golf equipment for a long time. Chick previously worked in club design and product development, including at Cleveland Golf. His public work history credits him as industrial design lead on the Cleveland CG14 wedge and includes later contributions to Nike equipment such as the Engage wedges and Vapor Pro Combo irons used in major professional wins. 

His path eventually took him into other areas of product design and to HP, where he was exposed to metal additive manufacturing. According to a recent profile on Acey, that combination of traditional golf-club design experience and newer manufacturing technology ultimately pushed him back toward equipment development and the creation of the 263 wedge. 

That background is worth mentioning because the 263 doesn’t feel like 3D printing for the sake of saying a club is 3D printed. There’s a conventional wedge hiding underneath all that latticework. 

Acey 263 Wedge Looks and Construction

From behind, the 263 is impossible to mistake for anything else. The open triangular lattice dominates the cavity and gives the wedge a distinctly technical appearance. In person, it looks better than we expected. The exterior finish is clean, the machining is sharp and the overall presentation feels appropriately premium. 

The internal portions of the lattice are rougher and less finished than the exterior surfaces, which is about what you’d expect from this type of manufacturing process. That contrast is visible up close, but it doesn’t really detract from the overall appearance. 

Acey external lattice structure

At address, however, none of that matters. You can’t see the lattice at all, and the head shape is conventional, just a bit larger than a traditional blade wedge. Think more along the lines of a Cleveland CBZ or another cavity-back wedge. The topline has some substance, the leading edge is gently rounded and offset is minimal. 

That contrast is probably the most interesting visual element of the club. It looks wild in the bag and completely normal over the ball. 

Sole Design and Turf Interaction 

The sole is fairly wide, particularly on the 55°, but there’s substantial trailing-edge relief built into it. That makes a noticeable difference in how the club sits and plays. 

Square to the ball, the leading edge sits relatively close to the ground. Open the face and it still stays impressively low for a wedge with this much sole width. That gave the 55° more versatility than we expected and made higher pitches easy to set up without feeling like the leading edge was suddenly sitting halfway up the ball. 

Acey 263 Wedges with ball

On tight lies, wet turf and softer ground, the 263 moved through the turf without much tendency to dig. In softer conditions, that wide sole should be especially useful for golfers who tend to get steep or take too much turf. We didn’t see the sole bounce aggressively into the ball either, though extremely firm ground could obviously change that equation. 

For a cavity-back wedge with this much mass down low, the ability to open the face comfortably is one of its stronger design traits. 

Acey 263 45° Wedge Performance

The 45° sits in a slightly unusual spot in modern iron sets. Many game-improvement pitching wedges are closer to 43° these days, while gap wedges often sit around 48°, so the Acey falls somewhere in between. 

For us, full swings carried roughly 120 yards. Launch was relatively high and spin was more moderate, which made it behave much like a cavity-back pitching wedge. Distance consistency was excellent, and there was plenty of forgiveness across the face. Toe strikes retained distance especially well, and low-face contact was also reasonably protected. 

Acey Wedge Review 45 degree

Acey makes a point of talking about its face-centered sweet spot, but we’re talking about very small positional changes here. That’s not something we can meaningfully quantify from normal testing. What we could see was very good off-center performance. 

Feel is solid, though not blade-like. Center contact is somewhat muted, while strikes farther away from center produce a slightly sharper response. 

There is one very unusual side effect of all that open lattice work: the wedge whistles during a full swing. It’s noticeable enough to be a little unsettling at first because it’s not something you expect from a golf club, but you do get used to it. 

Acey 263 55° Wedge Performance

The 55° carried roughly 100-105 yards on full swings and followed the same general performance pattern as the 45°. Launch was relatively high, spin was lower than we’d expect from a traditional blade wedge and full-swing distance was very consistent. 

Partial shots were also predictable, though some half swings seemed to come up slightly shorter than expected. We didn’t have enough testing time to determine whether that was a real pattern or simply a small sample. 

Around the green, the wide sole provides plenty of stability on basic chips and pitches. The more impressive part was how easily the face could be opened. The trailing-edge relief keeps the leading edge from rising excessively, which made higher pitches and lob shots very manageable. 

The head feels substantial through impact as well. It has the stability you’d expect from a cavity-back design without feeling unwieldy. 

Does 3D Printing Actually Change Wedge Performance? 

That’s the obvious question with the 263. 

If nobody told us the wedge was 3D printed, we probably wouldn’t identify that purely from hitting it. We would identify it as a cavity-back wedge. The most obvious performance advantage is stability and speed retention on off-center contact, where the Acey does a good job preserving distance compared with a traditional blade-style wedge. 

Can we isolate the lattice itself as the reason? Not really. What we can say is that additive manufacturing gives Acey the freedom to create that lattice structure and place mass in ways that wouldn’t be practical with conventional manufacturing. That is the real value of the process. 

The lattice does require a little extra maintenance. Dirt and grass can collect inside the openings, so an occasional rinse will be necessary, but it’s hardly a major inconvenience. We haven’t seen any durability or finish issues so far. 

Our Take on the Acey 263 Wedge

The Acey 263 looks much more radical than it actually plays, and that’s probably a compliment. 

Behind the ball, it’s a familiar cavity-back wedge with a slightly larger profile, a forgiving sole and enough relief to remain surprisingly versatile. The 3D-printed lattice gives Acey more freedom to manipulate mass and stability, but our experience playing the wedge remained quite conventional.  

The $300 price is impossible to ignore. Metal 3D printing is still expensive, and Acey openly acknowledges that current production costs are a major reason for the premium. What we can say is that Acey isn’t simply charging a premium for something that looks unusual. The 263 is thoughtfully designed, well made and performs like a legitimate golf club rather than a technology demonstration. 

Acey 263 Wedge Specs, Price and Availability

SpecAcey 263
Lofts45°, 50°, 55°, 60°
Bounce10°
Construction3D-printed 316L stainless steel
SolePerimeter Relief
Swing WeightD3 (45°/50°), D5 (55°/60°)
Stock ShaftTrue Temper Dynamic Gold S300
Stock GripTrue Temper ICON
FinishesSatin, Raw, Copper, Gunmetal
Price$300 per wedge

Acey says the wedges are designed and assembled in Jacksonville, Florida and are listed as conforming by the USGA. Head-only options are also available. More information is available at AceyGolf.com. 

Go to discussion...

Social Media Director and Staff Writer Ryan Hawk lives in Northwestern Illinois. He's been a writer for The Hackers Paradise since 2011, and has been part of several THP Experiences.