If you have ever owned a set of the DBM finished irons, this isn't even a debate. After even a few years of use there is no bag chatter. The only signs of wear is a graying on the sole or the sweet spot. Since there is no coating on the grooves, they remain sharp. This process reacts differently...
Weekday walking $21, Ride $35
Weekend walking $27, Ride $41. This is our cheapest course. Pinehills Golf Course
A really nice course is
Weekday $40 No walk option
Weekend $50. Stone Hedge Golf course
I would say the biggest improvement may be in feel. The PW and GW are certainly ripe for the upgrade as they are now hollow like the rest of the set.
The lighter shaft can make a big difference as a round progresses. Swinging a 110g shaft can wear out a golfer. You are probably swinging the 95...
I hit the Qi 10 today with the AV limited S flex shaft. 9.0 head.
I gamed both the Stealth and the Stealth 2 in the plus models. I feel you can forget everything about those heads as this is a whole new animal.
Over my gamer TS3 is gained club head speed by nearly 4 mph. Feel is fantastic. I...
Not really..... Robin is still running it. He just hired some sort of managers to run advertising and shipping. So not the real changes that need to be made.
Sent from my SM-S908U using Tapatalk
So the trim code calls for the 4 iron shaft to be trimmed .5" a 6iron would be 1.5". So you want these S flex shafts to play as soft as possible to be closer to R. Putting the 4 iron shaft in the 5 iron will have it play 1/3 flex less. Then you trim the 5 iron to overall playing length. That is...
Your statement could not be any more wrong. They are a .370 shaft. They come uncut. You tip trim according to the head that the shaft is intended for. He wants to get them as soft as possible. So he is asking to soft step twice. Which is the only way to get them close to an R flex.
Then they...
These will soft step fairly well but I'll recommend you try one head first. Before you commit to the entire set.
What weight are the shafts?
Sent from my SM-S908U using Tapatalk
Today I ran through some different shafts. The one I'm gaming is a Tensei Blue. I had both the TSR3 and TSR4 heads.
I couldn't find a better over all combination. But another thing happened. The run off between the 3 and 4 was almost a dead heat. I honestly am not sure which one I like better...
Today I ran through some different shafts. The one I'm gaming is a Tensei Blue. I had both the TSR3 and TSR4 heads.
I couldn't find a better over all combination. But another thing happened. The run off between the 3 and 4 was almost a dead heat. I honestly am not sure which one I like better...
If you put it on a wide base with wheels that lock. It's a good compromise. You still have to put a foot on the base. But bending, you are putting intermittent pressure or bumping the bar till you get your specs.
I have mine on a rolling work station and I get by pretty easily.
Sent from my...