Any pictures of this?
I'm curious if it's really needed, and how you did it.
sure thing, i got the idea from a v2 fan group on Facebook.
Needed:
26" mountain bike tires
gel Super Glue
1/2" hinge door screws
100lb test braided fishing line
Flex Seal liquid rubber
How to:
Cut bike tire in half and place around the v2 tire for measuring
Trim to length, leaving about a half-inch gap for the ends to come together
Trim about 1/4" - 1/2" off the tire side walls so that it lays flat covering the v2 wheel, I used a rotary tool
Use the braid fishing line to sew tire ends together; should be sized such that you're able to slide over the wheel, but tight enough that it's not super easy
Apply glue inside tire and on wheel surface, slide tire on
Add screws spaced around the tire
Spray Flex Seal over the gap/fishing line connection
i'm not sure if it was really needed or not, but it was cheap and easy. i've read others saying it does make the cart a lot quieter when driving on paved cart paths. mine is holding up very nicely. if anything the treads can hold cut wet grass a bit too much, and i usually need to stop by the cart shack to hose them off before i put it away in my truck.