Bettinardi Putter Thread

QB6 Stinger Bee w/Knurl Neck

20210311_161500.jpg

20210311_161518.jpg

20210311_161532.jpg
 
Picked up a new driver cover

2A4B8617-03CA-41F2-B6AC-369EBD614CAE.jpeg
 
When on the fence about a putter, what better way than to crowd source the answer!

Got fit into the SS28 or the Queen B 6 today. Intrigued by the RC face and like the finish a bit more of the SS, especially if I paint fill the red to blue, but probably like the feel of the Queen B a bit more. Which way would you go and why?
 
When on the fence about a putter, what better way than to crowd source the answer!

Got fit into the SS28 or the Queen B 6 today. Intrigued by the RC face and like the finish a bit more of the SS, especially if I paint fill the red to blue, but probably like the feel of the Queen B a bit more. Which way would you go and why?

It's gonna come down to feel IMO. The micro honeycomb face is the firmest milling I've tried on a non-insert Betti, and for me was just too hot. Haven't tried an RC face putter yet, but rolled a bunch of FIT face putters over the years and I would rank them as some of the softest feeling milled putters I've tried. Their fly milling is somewhere in the middle for me.

Blind buy I'd go SS28 based on my experience with the micro honeycomb face in the past. I'm also not a huge fan of the rose gold finish, but that's 100% just my opinion.

If you were fit into a wide blade, check out the aftermarket. There's usually a bunch of putters that match those general specs available on Ebay, etc. Tons of QB6 and similar shapes from Bettinardi. You might find a color/face variant that you like better than this year's offerings.
 
It's gonna come down to feel IMO. The micro honeycomb face is the firmest milling I've tried on a non-insert Betti, and for me was just too hot. Haven't tried an RC face putter yet, but rolled a bunch of FIT face putters over the years and I would rank them as some of the softest feeling milled putters I've tried. Their fly milling is somewhere in the middle for me.

Blind buy I'd go SS28 based on my experience with the micro honeycomb face in the past. I'm also not a huge fan of the rose gold finish, but that's 100% just my opinion.

If you were fit into a wide blade, check out the aftermarket. There's usually a bunch of putters that match those general specs available on Ebay, etc. Tons of QB6 and similar shapes from Bettinardi. You might find a color/face variant that you like better than this year's offerings.
That is a very accurate description of the feel comparing the two. Being new to the brand, what line offers the fly-milling? Or is a year by year thing?
Great call on looking into secondary market. Not looking for a collectible, just one I can game and enjoy, although eBay gives me a touch of pause.
 
Who would you all send a Mizuno Bettinardi BC4 to be refinished? BOS? Other?
Thanks!
 
Last edited:
That is a very accurate description of the feel comparing the two. Being new to the brand, what line offers the fly-milling? Or is a year by year thing?
Great call on looking into secondary market. Not looking for a collectible, just one I can game and enjoy, although eBay gives me a touch of pause.

Don't believe any of their current stock offerings have the fly milling. I'd have to look in their archives to see if they've had any recently. I've mainly seen them on limited releases. Guessing they don't use it too much since it's very similar to everyone else's milling.

I've had good luck on eBay but everyone is different.
 
Some Wizard Putter Porn!!! :cool::cool::cool:

20210310_152734.jpg
 
Played my first 18 on the year yesterday. Here's a look at my bag from yesterday.

20210321_121403.jpg
 
A few pickups from recent weeks

D43562F2-12D3-4AAA-9B1E-4385FCDCDA0D.jpeg
 
Picked up my first Betti today. Completely stoked about it as I’ve never had a putter that felt so premium.

I do have a question though. Maybe a dumb one.

I purchased at Golf Galaxy and was provided the headcover in the photo which is a blade shape headcover. This is a VERY snug fit. With this shape being mallet(ish) was I given the wrong cover or will it stretch out over time? I played 9 holes earlier after purchasing and gotta say it was annoying with how tough it was to get on and off.F82202BD-AE5F-458B-AF91-2A7E53D6C6C6.jpeg
 
Picked up my first Betti today. Completely stoked about it as I’ve never had a putter that felt so premium.

I do have a question though. Maybe a dumb one.

I purchased at Golf Galaxy and was provided the headcover in the photo which is a blade shape headcover. This is a VERY snug fit. With this shape being mallet(ish) was I given the wrong cover or will it stretch out over time? I played 9 holes earlier after purchasing and gotta say it was annoying with how tough it was to get on and off.View attachment 9000159

From other pics I'm seeing on the Bettinardi Facebook page I'm a member of, it seems like you got the right headcover.

166530512_4653014925299_3720514181338696746_n.jpg
 
Picked up my first Betti today. Completely stoked about it as I’ve never had a putter that felt so premium.

I do have a question though. Maybe a dumb one.

I purchased at Golf Galaxy and was provided the headcover in the photo which is a blade shape headcover. This is a VERY snug fit. With this shape being mallet(ish) was I given the wrong cover or will it stretch out over time? I played 9 holes earlier after purchasing and gotta say it was annoying with how tough it was to get on and off.View attachment 9000159

That’s the correct style HC just not sure if the one for the QB10 is a bit wider or not. Here is the HC

E0CE8789-976C-4A9C-962D-1461BE595445.jpeg
 
  • Like
Reactions: PW2
Just got this putter back! Refinished in a Torch Blue, Miami Vice paint fill and BGT Stability Tour

A564E78F-1862-4701-8A22-6DAD4BEEC278.jpegBD7892B9-ED9A-4382-9E4F-39D4FAD2F13E.jpegE7D02C5E-FD0D-40B9-B284-5A402B6B5FF5.jpeg99AEEAAD-C3DB-4EA5-8363-048C4E7412D6.jpeg68E8875D-539A-4D59-A207-4BB3FF53C5A7.jpeg
 
Some things from the St Patty's Day Hive event I picked up on the 17th of March and The Pinehurst Bettinardi trip.

hNHJ8O1l.jpg
 
Was wondering anyone know anything about this Bettinardi. Was thinking about bring it to refinish.
3.png1.png2.png
 
Just picked up this piece of hardware from the Hive this afternoon. W O W......................................!!!

BB0 RJB .999 Silver Stinger Dass

87UKN2Sh.jpg


5xlXS96h.jpg


f7WPMmDh.jpg
 
Last edited:
Just up this piece of hardware from the Hive this afternoon. W O W......................................!!!

BB0 RJB .999 Stinger Dass

87UKN2Sh.jpg


5xlXS96h.jpg


f7WPMmDh.jpg

You make that into a long neck and you'll have my attention!
 
Have that exact same putter, but in Tiffany Blue. Don't know if mine had been refinished before I picked it up.

TF95jALh.jpg


Da764Nhh.jpg


B8Pu4Ish.jpg
Nice! I think probably just different finish so the paint fill is different color.
 
New to the collection.

Half Moon Dass Racing T-Hive Stinger

xS54nBB.jpg


3hdNQXk.jpg


TfGRrTM.jpg
 
New golf bag from Bettinardi.

5lhLsP3.jpg
 
Back
Top