kc720
Active member
Does it have the DG spinner?
Yes dg spinner in it.
Sent from my SM-N900T using Tapatalk
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Does it have the DG spinner?
After Cookie's explanation about the Spinner being the cause of the problems with the 50* I started pondering what you guys are talking about with the iron shaft. If one of you does if please report back on results.
For those that had issues with dg spinners, were those issues confirmed with launch monitor numbers? Or just on course performance? Do you think it could just be mental or hard convinced it's the shaft?
Sent from my SM-N900T using Tapatalk
How do you figure bending to 50* doesn't works well for a gap? I've had no issues and have no holes in the bottom of my bag
No launch monitor for me. Due to the amount of time I've put in on the range and less time but consistent results on the course, I was pretty confident it wasn't me. I don't know that it is the shaft but Cookie's explanation makes a lot of sense.For those that had issues with dg spinners, were those issues confirmed with launch monitor numbers? Or just on course performance? Do you think it could just be mental or hard convinced it's the shaft?
Sent from my SM-N900T using Tapatalk
I will probably buy a shaft to match the set and try it in the 50*. Unfortunately the real life calendar is very full right now so that isn't going to happen especially soon.For those who are struggling distance wise with the 50* wedge, and believing it's shaft, I would really enjoy seeing a comparison in shafts to see if it's the spinner that's hindering your success. As someone who regular swings all his wedges over 3/4 swings, I'd really enjoy that.
For those who are struggling distance wise with the 50* wedge, and believing it's shaft, I would really enjoy seeing a comparison in shafts to see if it's the spinner that's hindering your success. As someone who regular swings all his wedges over 3/4 swings, I'd really enjoy that.
So after my sim round tonight I had Mark, the owner, bend my 54* to 55* and he also bent it 2* degrees upright for me to match my irons and I was hitting it smack dab in the middle on the lie board. He threw the range up on the sim for me and set the target green to 85 yards. I hit 15 balls and 14 of them were on the green. I really really enjoy this wedge. I think I'd rather go 56* to 55* just to cut down a little on the bounce, but the more I work with this wedge the more I really look forward to gaming these.
I'm leaning towards a 52/58 setup, but that is open to discussion with my tour rep and fitter. As far as shafts go, I like the DG Spinner that is in my Mizuno, but again I am not opposed to considering other options. I don't think I would go with the DG Spinner in my 52*. I would lean towards matching it with whatever I have in my irons.
Which irons you leading towards? Whats the PW loft u are looking at?
Nice! Bounce could be helpful in the fluffy bunkers.
I'm leaning towards a 52/58 setup, but that is open to discussion with my tour rep and fitter. As far as shafts go, I like the DG Spinner that is in my Mizuno, but again I am not opposed to considering other options. I don't think I would go with the DG Spinner in my 52*. I would lean towards matching it with whatever I have in my irons.
I think the pw is 46° in the CB and DPC
Sent from my SM-N900T using Tapatalk
I think the pw is 46° in the CB and DPC
Sent from my SM-N900T using Tapatalk
I truly believe ill go 52 bent to 50, 56 bent to 55, and a 60. Those lofts are what I have gotten accustomed to
Sent from my SM-N900T using Tapatalk
I truly believe ill go 52 bent to 50, 56 bent to 55, and a 60. Those lofts are what I have gotten accustomed to
Sent from my SM-N900T using Tapatalk
nothing wrong with that....got a shaft preference yet?
Thats an interesting idea and I have pondered it. I see the reasoning behind it. Me personally I use all my wedges for full swings so I will either stick with the spinners or put same shaft as irons in all of themKang that's what I'm leaning towards as well. Only thing is I will most likely go with a matching iron shaft in my 50*
I thought about that as well, but I've just gotten used to playing wedges with a smaller amount of bounce. Nothing is concrete yet!!