Hello. Im selling a set of graphite iron shadt pulls.. The 7- pw is Bassara 55x5ct. The 7 and 8 irons are reg flex soft stepped once, the 8-sw is lite flex. The 7-pw have blue Z5 grips. The gw and sw have purple.
The shafts for 6he wedges were sanded down to .355. The rest of.the shafts were sanded down a little at the tip to fit my dad's Fourteens, but since all had tungsten tip weights, I didn't have to.sand the entire insertion length.
The tips need to be cleaned and prepped. Some of the tips still have the stem on the weights. I didn't want to risk pushing it down into the shaft and me having to remove the grips to get it out. I also used BB&F ferrules do tip prep is longer than if I were to use a shorter ferrule.. Lengths are
grip to tip:
7 - 36 1/16
8 - 35 1/2
9 -35
pw - 34 9/16
gw - 34 1/8
sw - 33 1/2
Raw length
6 - 36 1/2
Sold
The shafts for 6he wedges were sanded down to .355. The rest of.the shafts were sanded down a little at the tip to fit my dad's Fourteens, but since all had tungsten tip weights, I didn't have to.sand the entire insertion length.
The tips need to be cleaned and prepped. Some of the tips still have the stem on the weights. I didn't want to risk pushing it down into the shaft and me having to remove the grips to get it out. I also used BB&F ferrules do tip prep is longer than if I were to use a shorter ferrule.. Lengths are
grip to tip:
7 - 36 1/16
8 - 35 1/2
9 -35
pw - 34 9/16
gw - 34 1/8
sw - 33 1/2
Raw length
6 - 36 1/2
Sold
Attachments
Last edited: