FS: RAZR X 4-PW w/ C-Taper S+ , R11 Driver, Miyazaki Kusala White, JAWS Wedges

Status
Not open for further replies.

Rekimoto

man in love with a putter
Joined
Sep 24, 2011
Messages
843
Reaction score
6
Location
Seattle,WA
Prices INCLUDE shipping. Not looking for trades at the moment. CONUS only / PAYPAL only

Callaway RAZR X iron set, RH 4-PW, with C-Taper S+ shafts. $400
Used for about 6 months (saw a good amount of play in the fall, not as much through the winter)

Condition 8/10. They look like they have been played, but as far as I can tell there is no above normal wear or tear. I carry my clubs so there is a little bit of bag chatter. The most hit club in the set would be the 7-iron so that has the most pictures. NOTE: There is a tiny bit of surface rust on the shaft of the pitching wedge, I played through a pretty wet Seattle Winter. I havent tried but I bet this rust could be taken off with minimal effort.

The NDMC grips had only about 10 rounds of use and still have a lot of life in them.

Price is firm, based on the price of these shafts I think this is a pretty sweet deal. Also, if you want them I would throw in the Wedges below for an additional $15.

PICS:

Spoiler
427116_10151165354691098_629520235_n.jpg


Spoiler
480602_10151165354696098_1704341077_n.jpg


Spoiler
246906_10151165606151098_123304732_n.jpg


Spoiler
486578_10151165605741098_1549804764_n.jpg


Spoiler
483994_10151165605456098_50806202_n.jpg


Spoiler
603396_10151165604721098_440471090_n.jpg


Spoiler
293241_10151165608931098_2072490565_n.jpg


Spoiler
524462_10151165354676098_324394494_n.jpg




Taylormade R11 Driver 9*, Standard Blur shaft Stiff (Cut down 3/4") $125
Very good condition. NDMC grip is still good and has one extra wrap. Comes with wrench.
SOLD!



Miyazaki Kusala White 56s w/ R11 tip. (Cut to 43.25" with tip) $190


Spoiler
183696_10151165721631098_175426503_n.jpg


Spoiler
561822_10151165724401098_1730484408_n.jpg


Spoiler
391562_10151165724641098_808892106_n.jpg





Callaway JAWS Wedge Set (52,56,60) NON CC GROOVES - $50

Nicely rusted, well used, but these "Mack Daddy" grooves will still bite any ball and make it spin.
SOLD!



If interested in more than one item just let me know and we can work out an EVEN BETTER deal!

Thanks!
 
Last edited:
Little bump for the evening crowd.

Sent from my DROID RAZR using Tapatalk 2
 
PM sent.
 
Gonna try the morning crowd this time.

Been checking the bay, you cant find this stuff there in these conditions for these prices!

You know you want it!

Sent from my DROID RAZR using Tapatalk 2
 
Got a pic of the face and top line of the R11?
 
Got a pic of the face and top line of the R11?

Sure, I will put some up this evening. It's pretty clean all around....also, it comes with a headcover which I realize I didnt mention...and a wrench...and a couple of extra after market weights.
 
Sure, I will put some up this evening. It's pretty clean all around....also, it comes with a headcover which I realize I didnt mention...and a wrench...and a couple of extra after market weights.

Cool...
 
Bump plus new photos of the R11. Noticed a little wear out towards the toe on the face and a little bit of marking on the back of the crown. I cant really tell if the face has white marks from the paint on the ball/tee or those are spots where the black paint has worn.

Either way, it's cosmetic and you can't see it at address.
 
Howdy Mods- You can go ahead and lock this up. The iron set is kind of weird combo with the c-tapers so im gonna try my luck on the bay!

Thanks to all who looked and/or bought something from me! Im sure ill have more up in the future.
 
Status
Not open for further replies.
Back
Top