Looking For Testers: Cleveland ZipCore Tour Rack Wedges

Current wedges-Bridgestone XW-1’s. Custom THP stamped I might add.

Only currently playing the 56*. Just need it short sided and from sand. I play my set GW 98% of the time from 135 in.

Would like to try something in the 49-50* range to see if something can replace my set gap wedge, and be better.

Soul grind. Or was it sole grind? Either way, that’s the club I want.
 
What are your current wedges?: I have played just about every Cleveland wedge since the CG12s, and currently have a full set (60, 56, and 50 degrees) of Cleveland RTX-4 wedges.
What loft would you like?: I would prefer a 60 as that is my most used wedge and I use it for a variety of shots around the green and inside 90 yards. Would he able to really test out the versatility.
What Tour Crafted Grind would you get?: I would get the Relief Edge Grind with the Standard Leading Edge
 
I always Wanted to try Clevland wedges and these look sweet.
My accuracy is off a bit with my
current line up.
Callaway MD forged 50/10
Callaway MD pm Grind 60/10

Thanks for the chance.



Sent from my SM-N981U using Tapatalk
 
Last edited:
Easily my favorite finish of the three options. The original satin might be replaced here shortly.
 
What are your current wedges?
Bridgestone XW-1 Wedges 51*-56* - 60*

What loft would you like?
50* Mid

What Tour Crafted Grind would you get?
I would like the Heel and Toe !
 
What are your current wedges? RTX4 Raw 50,54,60
What loft would you like? 60 Full
What Tour Crafted Grind would you get? S Grind. I love my current 60 Full but would love it to have a little trailing edge relief.
 
Current wedges: Wilson FG Tour PMP
What loft would I like to test?: 56* Mid
What tour grind?: Heel & Toe grind
 
These Zipcores are next level. @gkeller813 can attest. So spinny it is unreal.
 
The Cleveland RXT. With polish would be
Nice
I now use Wishon wedges have full set
52 thru 60

Would like to try and test 52 with front grind
And 60 with both grinds.
 
Right now just using a 56 Degree Maltby. Would love to test a 58 degree heel and toe grind. Thanks for the opportunity!
 
This is an interesting opportunity. Thanks THP and Cleveland

What are your current wedges? Cleveland RTX4
What loft would you like? 56*
What Tour Crafted Grind would you get? The Relief Edge Grind, Rounded Leading Edge

Thanks again. I can't wait to see everyone's feedback on these!
 
These Zipcores are next level. @gkeller813 can attest. So spinny it is unreal.
Took some getting used to, but now you can be aggressive, and know you have the stopping power. Crazy how even short greenside chips check pretty hard!
 
What are your current wedges? Currently play a Cleveland 588 56 deg.
What loft would you like? I would love to try a new Cleveland wedge with the same degree (56)
What Tour Crafted Grind would you get? Relief Edge grind.
 
What are your current wedges? Vokey Smb 8
What loft would you like? 54-10
What Tour Crafted Grind would you get? Heel and sharpened.
 
I have always been a Cleveland guy but recently got fit for SM8s, (no zip core available during my fitting) These zip cores really are calling me but not being able to hit them led me to go Titleist.

I am dying to try these zip cores out and will swap out my wedges for them if they perform fantastically

I'd love to try a 58* or similar lob wedge loft , Heel / Toe grind, Standard or Rounded

Thank you for consideration!
 
What are your current wedges?
Current wedge set is a Callaway MD 48° raw
Wilson PMP tour grind 52° and 56° raw
What loft would you like?
I’d like a 56° full Wedge
What Tour Crafted Grind would you get?
I’d get the full wedge with some heel and toe relief
 
Aww man! Once again it sucks being left handed.:cry::ROFLMAO:

Good luck to all that enter!
 
What are your current wedges?
RTX-4 Black Satin 52, 56, 60 (bent to 61)

What loft would you like?
60 degree

What Tour Crafted Grind would you get?
S shaped grind on Full, because I would really like to have that versatility around the greens and bunkers. That's where I use my 60 the most and enjoy having full bounce on those types of shots.
 
What a great opportunity! Heading over to the site to do some research!

 
What are your current wedges?— Currently play Ben Hogan Forged Ft Worth Wedger 50, 54, 58
What loft would you like? 54 degree
What Tour Crafted Grind would you get? Mid Sole
 
Great opportunity to select and test an interesting, to say the least, wedge from Cleveland! With my golf season winding down here, I would not have a full and fair opportunity to test the wedge and give my feedback to the extent that the forum deserves. But, I look forward to reading about these wedges from those who are selected.
 
TaylorMade Milled Grind
Would love to get my hands on a 54*
Wanna try that heel and toe grind. Looks awesome!
 
I currently use 50 and 55 degree. I would love to try a 60 degree with mid sole grind.
 
What are you current wedges?
- Cleveland CG15 52 degree
- Titleist BV Vokey 56 & 60 degree
What loft would you like?
- 56 degree
What tour crafted grind would you get?
- I would get the the relief edge grind.
What a great opportunity! I rely heavily on my 56 degree wedge to be my do-it-all wedge but the Titleist Vokey just isn’t working the magic like it used to and I would love to try out Cleveland!
 
Current Wedges : Ray Cook Silver Wray 60,56,52
Degrees Preferred : 56 or 60
Design : Heel and Toe
 
Back
Top