volvofan
Member
- Joined
- Nov 25, 2022
- Messages
- 51
- Reaction score
- 60
Prices include CONUS shipping; discounts available on multiple items. Check out my other listings for clubs and accessories. All shafts are ungripped unless otherwise specified. I have several grips to choose from (Callaway, Golf Pride, and other brands) new or gently used, and will be glad to install the grip of your choice for $5 to any shaft.
Autoflex SF505 hybrid or iron (.370 parallel tip) shaft pull, 37”. $150. $210 or so new.
Used for two seasons in my all-in-one club, fewer than 10 rounds. Love the feel of an Autoflex on my driver, but not so much on my all-in-one, so off it goes. Includes the cute little sleeve that comes with it (unused). Raw shaft.
KBS CT Tour steel putter shaft, PVD-coated black, 32.25”. $30. $35 and up plus shipping for a raw shaft. This one includes an Evnroll putter grip and was pulled from a gently used ER11v to replace with a telescoping version.
Hzrdus Smoke Black 6.0 60g low spin driver shaft, Callaway tip, 44.5” length with adapter (plays at 45.75”). $50. $75 or more new. Used sparingly with my Callaway Epic max 12 deg driver with excellent results… only letting it go because I’m switching to a telescoping steel shaft for my travel set (steel shaft with a driver… this ought to be a blast from the past!). Has a Callaway grip on it in very good condition.
Aerotech Steelfiber FC75 hybrid F3 (regular flex) shaft pull, 38.75”, .370 parallel tip, $45. $60 or more with shipping on eBay. Pulled from an Epic Superhybrid 4. Has a Winn Dri-Tac wrap grip on it in good condition.
Divnick telescoping 3-piece True Temper Dynamic Gold Steel shaft, Regular flex, 34” (collapses to under 16”), .335 tip. $75. You can buy these separately from Steve Divnick, but they cost nearly as much as his clubs ($150 and up). Perfect for making a travel putter! Or any club, for that matter. Includes a .335 to .370 shim. If you want to mail me a putter head, I’ll install it for you for free and set the playing length as you desire. Has the Tacki-Mac wrap grip with the machined steel endcap (so you can rap it upside down on concrete to collapse it without damaging the grip’s end cap). VERY solid once extended properly. You would never know it was a multi-piece shaft.
Proof of life (missed a couple shafts but you'll recognize my floor and filing cabinet, LOL):
Autoflex SF505 pics:
Hzrdus Smoke pics (first length photo is with no driver head attached, second is with... most modern Callaway drivers add about 1.25" to a shaft fitted with an adapter.
KBS Tour CT Putter shaft pics:
Autoflex SF505 hybrid or iron (.370 parallel tip) shaft pull, 37”. $150. $210 or so new.
Used for two seasons in my all-in-one club, fewer than 10 rounds. Love the feel of an Autoflex on my driver, but not so much on my all-in-one, so off it goes. Includes the cute little sleeve that comes with it (unused). Raw shaft.
KBS CT Tour steel putter shaft, PVD-coated black, 32.25”. $30. $35 and up plus shipping for a raw shaft. This one includes an Evnroll putter grip and was pulled from a gently used ER11v to replace with a telescoping version.
Hzrdus Smoke Black 6.0 60g low spin driver shaft, Callaway tip, 44.5” length with adapter (plays at 45.75”). $50. $75 or more new. Used sparingly with my Callaway Epic max 12 deg driver with excellent results… only letting it go because I’m switching to a telescoping steel shaft for my travel set (steel shaft with a driver… this ought to be a blast from the past!). Has a Callaway grip on it in very good condition.
Aerotech Steelfiber FC75 hybrid F3 (regular flex) shaft pull, 38.75”, .370 parallel tip, $45. $60 or more with shipping on eBay. Pulled from an Epic Superhybrid 4. Has a Winn Dri-Tac wrap grip on it in good condition.
Divnick telescoping 3-piece True Temper Dynamic Gold Steel shaft, Regular flex, 34” (collapses to under 16”), .335 tip. $75. You can buy these separately from Steve Divnick, but they cost nearly as much as his clubs ($150 and up). Perfect for making a travel putter! Or any club, for that matter. Includes a .335 to .370 shim. If you want to mail me a putter head, I’ll install it for you for free and set the playing length as you desire. Has the Tacki-Mac wrap grip with the machined steel endcap (so you can rap it upside down on concrete to collapse it without damaging the grip’s end cap). VERY solid once extended properly. You would never know it was a multi-piece shaft.
Proof of life (missed a couple shafts but you'll recognize my floor and filing cabinet, LOL):
Autoflex SF505 pics:
Hzrdus Smoke pics (first length photo is with no driver head attached, second is with... most modern Callaway drivers add about 1.25" to a shaft fitted with an adapter.
KBS Tour CT Putter shaft pics:
Last edited: