- Admin
- #1
The Ultimate Shaft Event is back in 2019 and this year is going to be incredibly special.
Qualifying
THP Events are held throughout the year and are incredibly unique ways to share a round or weekend with THPers and are filled with equipment, prizes and more. Your ticket to enter these events is the 2019 Albatross Club membership which goes to help a wonderful charity and for more information on that, click here.
Small Batch
There will be some surprises
The experience will begin about a month before the event where you will get a shaft sent to you from Project X. This is called your baseline shaft and your job will be to test it out and take some notes for a few weeks about what you like and what you would change.
Once the event begins at Project X Headquarters, there would be a tour and then you will sit down with the experts and design your own shaft. Based on the current feedback as well as the performance notes from your baseline shaft, adjustments to flag sizes, material angles and more would be made. You will get to see torque, frequency, tip deflection change as your design gets adjusted. It might sound overwhelming, but trust me when I say with the team in place, this will be an unforgettable experience. You will be designing all of the properties of your shaft with a team of people with expertise to make it perfect.
The next day would begin at Project X Headquarters again where you will hand roll your very own shaft. Then its off to graphics. Here you will work on design and color options for your completed project.
Cost
This is open to 5 THPers
The cost for the event is $349
This includes:
*Custom Shaft - You will create a 1 of 1 made specifically for you, by you.
*Round of Golf at Aviara
*Greens Fees
*Range Balls
*SWAG SWAG SWAG
*Private Group dinner with PX and THPers
*Contests
*And More
When & Where
October 3rd & 4th (this is a Thursday & Friday)
San Diego, CA
Project X Headquarters
Itinerary
Thursday AM - Arrive at Project X HQ for the day.
Breakfast will be there.
Get the tour and then shaft knowledge and creation begins.
Thursday PM - Lunch at their office
Thursday PM - Continue creating shaft.
Thursday Evening - Private Group Dinner
Friday AM - Project X HQ - Finish design process of your shaft
Friday PM - Golf at Aviara
Friday PM - Drinks Post Round with participants
Participants
Tenputt
AnthonyC
YukonLiving
Jman
pmm21
Qualifying
THP Events are held throughout the year and are incredibly unique ways to share a round or weekend with THPers and are filled with equipment, prizes and more. Your ticket to enter these events is the 2019 Albatross Club membership which goes to help a wonderful charity and for more information on that, click here.
Small Batch
There will be some surprises
The experience will begin about a month before the event where you will get a shaft sent to you from Project X. This is called your baseline shaft and your job will be to test it out and take some notes for a few weeks about what you like and what you would change.
Once the event begins at Project X Headquarters, there would be a tour and then you will sit down with the experts and design your own shaft. Based on the current feedback as well as the performance notes from your baseline shaft, adjustments to flag sizes, material angles and more would be made. You will get to see torque, frequency, tip deflection change as your design gets adjusted. It might sound overwhelming, but trust me when I say with the team in place, this will be an unforgettable experience. You will be designing all of the properties of your shaft with a team of people with expertise to make it perfect.
The next day would begin at Project X Headquarters again where you will hand roll your very own shaft. Then its off to graphics. Here you will work on design and color options for your completed project.
Cost
This is open to 5 THPers
The cost for the event is $349
This includes:
*Custom Shaft - You will create a 1 of 1 made specifically for you, by you.
*Round of Golf at Aviara
*Greens Fees
*Range Balls
*SWAG SWAG SWAG
*Private Group dinner with PX and THPers
*Contests
*And More
When & Where
October 3rd & 4th (this is a Thursday & Friday)
San Diego, CA
Project X Headquarters
Itinerary
Thursday AM - Arrive at Project X HQ for the day.
Breakfast will be there.
Get the tour and then shaft knowledge and creation begins.
Thursday PM - Lunch at their office
Thursday PM - Continue creating shaft.
Thursday Evening - Private Group Dinner
Friday AM - Project X HQ - Finish design process of your shaft
Friday PM - Golf at Aviara
Friday PM - Drinks Post Round with participants
Participants
Tenputt
AnthonyC
YukonLiving
Jman
pmm21
Last edited by a moderator: