The Garage Thread

Gotcha. Not sure those would work in the north with winter snow and slush. There's no way to keep them clean every day šŸ˜
True, here in Texas, I sweep a lot , i don't believe the wind has quite blowing for 3 weeks now
 
Hereā€™s our 3 car. I painted the wall this past week. Waiting for the race deck Fatherā€™s Day sale to do the matching flooring. Have surround sound via Sonos and an fan for Florida heat. Also trying to figure out better lighting as when I detail cars itā€™s just too dark. 8925D6EF-0614-4866-A0E0-9D3676C8E247.jpeg320BBDD4-9140-4957-9FD8-BF718DB91EE4.jpeg56E7C652-6DB8-4610-B00C-1B295C267E56.jpegFFA94248-6084-4D36-96F8-A74059E7A852.jpeg
 
The 3 day process of the garage coating began today. They prepped the floor and reapaired a couple small cracks today and laid down a 2 part epoxy primer. Tomorrow is a polyaspartic coat with some color chips and Wednesday is a 2nd coat of poly, more chips, followed by a clear coat. The garage is a 3 car(22ā€™x31ā€™) and the cost was $2,800 or a little over $4 per square foot.
0602B5EE-2505-4E86-B44D-C6B7A9096739.jpeg9E5AA08B-AC27-400E-B2A6-3DF12748907B.jpeg1B244190-FCA6-4AE4-9526-A471814108A0.jpeg1950CB34-BA01-4DA0-9037-9DDE260ECCD3.jpeg74FCAB45-323F-44BA-93A4-6828AB5A8177.jpeg
 
Last edited:
The 3 day process of the garage coating began today. They prepped the floor and reapaired a couple small cracks today and laid down a 2 part epoxy primer. Tomorrow is the polyapartic coat with some color chips and Wednesday is a 2nd coat of poly, more chips, followed by a clear coat. The garage is a 3 car(22ā€™x31ā€™) and the cost was $2,800 or a little over $4 per square foot.
View attachment 9006268View attachment 9006269View attachment 9006270View attachment 9006271View attachment 9006272
What base color/chips are you going with?
 
Last edited:
What case color/chips are you going with?

Itā€™s a grey, tan and white mix to match the house. My wife picked it as is the case with all decorating decisions, lol.

C886FEC3-B95B-4782-8B1B-A0D02E3F3C21.jpeg

ACE5D509-EB60-4F0C-8F83-B84A1D0B65E4.jpeg
 
An update to the new coating of my garage floor. It was fun to watch the process the last 3 days. Monday they prepped and used an epoxy primer, Tuesday was a different epoxy for the build coat and acrylic paint flakes, today was two coats of polyurea clear coat. The floor looks so much different and Iā€™m super pleased with the end result.


.CBC38F92-49A2-4B5F-B8F4-D80EB2ABC061.jpeg
 

Attachments

  • 1E389033-4E75-4BEF-AE33-5CD35CB59EA7.jpeg
    1E389033-4E75-4BEF-AE33-5CD35CB59EA7.jpeg
    169 KB · Views: 18
  • F19DACC3-F25B-40A2-83C4-B1004BF7C8EE.jpeg
    F19DACC3-F25B-40A2-83C4-B1004BF7C8EE.jpeg
    173.3 KB · Views: 21
  • 2DFAC1D9-DA10-435D-BFE2-0251F5774B7A.jpeg
    2DFAC1D9-DA10-435D-BFE2-0251F5774B7A.jpeg
    300.5 KB · Views: 26
  • D9F99BAF-BF9D-41D1-9EA8-A9870896189F.jpeg
    D9F99BAF-BF9D-41D1-9EA8-A9870896189F.jpeg
    104.8 KB · Views: 29
  • 4D2209FE-13D3-4F8C-8C18-7D6E5CBFC625.jpeg
    4D2209FE-13D3-4F8C-8C18-7D6E5CBFC625.jpeg
    103.7 KB · Views: 28
An update to the new coating of my garage floor. It was fun to watch the process the last 3 days. Monday they prepped and used an epoxy primer, Tuesday was a different epoxy for the build coat and acrylic paint flakes, today was two coats of polyurea clear coat. The floor looks so much different and Iā€™m super pleased with the end result and quality of work.
Looks amazing šŸ‘ definitely jealous!
 
Got our garage painted, pictures hung, the ceiling storage unit up and it feels so much bigger
7E9E01C7-05E3-4FC0-B4D9-6A4001C60F73.jpeg30F354ED-801F-45C9-8F1F-3818B93226CA.jpeg55F124F9-6E3B-4800-BB56-DC044AA29CBF.jpeg
 
What balls do you need to fill your collection? I have a few......

thanks buddy. I'm only missing a few random muni courses in Wisconsin, so just need to stop by them when I get to travel again for work
 
I have 3 more shelves to go that match, but itā€™s the perfect solution to my car detailing stuff.

9B7E709C-9E61-40FB-8DBF-BBB43343A8B9.jpeg
 
Mine is a bit messy, and usually has some project going.

I currently have my sim setup in the middle bay, but the plan is for a 2 post here shortly. I'm sick of rolling around on the floor, getting older sucks. lol.

20180828_193658.jpg
 
Getting closer to finishing my garage build. Got the walls finished, tire rack re-hung and cabinets installed. Next up is installing the slat walls and under cabinet lighting as well as the floor epoxy, which should be here within a week. Then just need to find a good stretch of weather to install it. (sorry about the messy garage, this was right after the cabinets were installed)
garage 3.jpggarage 2.jpggarage 1.jpg
 
Where did you pick up those shelves JB? (Please have an online store)
Honestly not sure. I think amazon actually. I can't find the link however for some reason. I know Adams Polishes and Griots Garage have their own versions, but they are a bit more expensive.
 
Mine is a bit messy, and usually has some project going.

I currently have my sim setup in the middle bay, but the plan is for a 2 post here shortly. I'm sick of rolling around on the floor, getting older sucks. lol.

View attachment 9014444
With those cars....I'd be nervous to have a sim in there. Great collection friend.
 
Garage in the house we're moving into in a few weeks has a/c vents for the garage. Sooooo I have decided to make the garage my office/man cave and will be doing a sim in there. Can't wait to get the project going after we move in a few weeks.
 
Still a work in progress but wanted to start yesterday. Was my Fatherā€™s Day Gift. My parents and brother have the same. Hopefully pics of the finished product fthis week. Next thing is to put some better lighting in there for detailing. 51ABB4C6-F6E6-4CCE-A19C-46AFDF865967.jpegAA61ADC5-3182-4438-A9E9-1897C7F6BFF6.jpeg
 
Still a work in progress but wanted to start yesterday. Was my Fatherā€™s Day Gift. My parents and brother have the same. Hopefully pics of the finished product fthis week. Next thing is to put some better lighting in there for detailing. View attachment 9015009View attachment 9015010

Curious what product you got and how you like it. With understanding that you just got it!

Added a cabinet setup in my garage and created the best little cabinet I have ever seen.

ca09839383939d2be4718f9c0c5bd9ae.jpg
 
Curious what product you got and how you like it. With understanding that you just got it!

itā€™s called Swisstrax. Itā€™s a snap together tile setup. My brother and my parents have both done it and looks amazing even after 3 years of northeast WX. I choose this over the other brand as this is larger tiles (15ā€) and these flow tiles are flat on top. Thereā€™s a detailed I watch online and he too installed these. He got on his skateboard and rode all over the floor which is something the others donā€™t see to be able to do as they are not flat. Iā€™m about 90% done but the rest are all the cuts against the one side wall and back. But think it looks amazing. Neighbors are already impressed. Now need new lighting so bad. Thatā€™s the next project. 5A06E0C8-BA10-4CA9-B330-ED62F29F677F.jpegFE7550DA-BAB6-4A36-B4EA-BC60426FCE02.jpeg3BD322F8-378E-45A5-88D9-B2F35D10AC4A.jpegDB59C037-2C98-4E8E-B301-9B45F94FC0F1.jpeg
 
Finally got ny shed delivered, now I just need to put it together... then it's garage clean out time!
20210629_174739.jpg

Even just getting all the lawn care stuff into the shed will be a huge help, then ill move the workbench down and expand tools, and have room for golf paraphernalia
 
Mine is a disaster! I can fit a car in, I have a fridge with cold beer and wine and my fishing poles and golf clubs are stacked in the corner! What a chaotic mess!
 

Attachments

  • BF9C7804-BECC-4F4D-A3C5-CBD98F92DF48.jpeg
    BF9C7804-BECC-4F4D-A3C5-CBD98F92DF48.jpeg
    157 KB · Views: 21
Back
Top