- Moderator
- #2,051
UST Mamiya All In Putter Shaft
- Joined
- Jun 4, 2010
- Messages
- 20,769
- Reaction score
- 36,544
- Handicap
- PBR
I've always struggled with speed control with the milled faces. It has nothing to do with the shaft I'm sure.
Milled faces are hotter (in my opinion) and I prefer a softer feeling off the face.
- Moderator
- #2,053
Yeah I’m not sure if I’ve just absolutley fallen in love with the standard Ai WH face or what, but the success is not there so far. I’m also pulling an irregular amount of putts too. Like I said, I’m giving it another shot today. But after this, I’m very interested to test your DW to see if that makes a difference
- Joined
- Jun 4, 2010
- Messages
- 20,769
- Reaction score
- 36,544
- Handicap
- PBR
It's been soooooo good for me. And I was so scared to change from the TriHot 5K Triple Wide.
Have you messed with the weight at all? In my personal opinion I feel like I had to adjust head weight with this shaft to keep my same general rhythm with my putter. It was pretty key for me.
IIRC it was a double or single bend. Talking to Danny he recommended to pull the shaft completely if you are doing a swap with a crank/plumbers neck or slant neck.
- Moderator
- #2,057
I have not. I’m coming from a counter balanced Stroke Lab that feels effortless so I might need to lighten the weighting in the putter.
Which way did you go? Heavier or lighter?
Yep, so exactly the same. Came from a counter balanced stroke lab and I had to bring the head weight down 20g to keep my same pace control. Which depending on what kind of putter your in, you may not even be able to bring it down 20g, but I'd try to bring it down as much as you can if you're struggling with pace control, it's definitely a pretty different swing weight vs. the CB Stroke Lab.
- Joined
- Sep 10, 2021
- Messages
- 15,682
- Reaction score
- 42,417
- Location
- Great White North
- Handicap
- 3.5 GC
Tracking says Tuesday, I am going to use today’s round as my decision maker about whether or not this will get installed right away.
- Moderator
- #2,060
This will be done in the future! Thank you sir!
is it pure speed control or do you feel a little disconnected from the stroke?
- Moderator
- #2,062
Yes? With all the pulls I’ve seen from it, I feel both. Today has been a bit better but it doesn’t quite have that automatic / effortless feeling
So a couple of things for me early on with the All-In shaft.
Double check and see what the weight difference is before and after the install. For me, it was slightly lighter so I wasn’t as aggressive as I normally was trying to get used to the new weight. I did end up adding weight to the bottom of my 3T which helped a ton. Also, I switched the grip. I’m not sure what you are using, but I went to a slightly larger super stroke and that helped me control the face angle and it also allowed me to start to put online with better speed control.
- Moderator
- #2,064
Yeah I went with my normal superstroke just two days ago. It’s helped compared to what I previously had
- Joined
- Sep 11, 2013
- Messages
- 99,832
- Reaction score
- 138,161
- Location
- Ponte Vedra, Florida
- Handicap
- 12.5
Just ordered me an All-In for my Jailbird. Let’s go!!! I’ve noticed my lag putting hasn’t been as good since moving to a new putter, everything else is the same except for the shaft.
- Joined
- Jun 4, 2010
- Messages
- 20,769
- Reaction score
- 36,544
- Handicap
- PBR
- Staff
- #2,067
Just put an All In in my S2S DW, this shaft feels like home.
33 putts yesterday, no 3 putts, all 2nd putts were stress free.
33 putts yesterday, no 3 putts, all 2nd putts were stress free.
I spent some time on the practice green this afternoon. I’m convinced the All-In & Ai One Milled 3T is the best set up I’ve had in a long time. Confidence is sky high and I’m getting the extra ready to list and sell.
- Joined
- Jun 4, 2010
- Messages
- 20,769
- Reaction score
- 36,544
- Handicap
- PBR
I'm so curious about this shaft with a S2S head, but I really can't justify trying anything else with the way I've been putting.
Glad it's working for you dude!
- Staff
- #2,070
Only one round in but the feel and distance control was on point.
- Moderator
- #2,071
Maybe the Double Bend of the DW is the reason I'm putting so much better with the SL shaft compared to the CH of the 1WT with the All-In in it. I just spent 10 minutes on my putting mat and it's not even close how much better I'm putting with my DW. @Nappy , since we are playing a scramble, I may just use your putter all 18 holes lol
That toe hang of the CH might not be your friend
Also the xtra mass of the DW might be what you need also and the Chicago (at least to me) was a more compact wide flange blade. When I tried the 1W after playing the Chicago it looked a lot bigger address
- Moderator
- #2,075
Chicago was for sure a more compact semi wide blade. Still the CH neck though. And what would you mean by mass? The DW and the 1W are almost identical in size when I have them side by side