What are you building? (Club style)

Man, '21 Apex Pros have an annoyingly short hosel height compared to just about everything else I have here. Makes shaft swapping a pain in the Richard. Can't match up length with anything easily.
 
Man, '21 Apex Pros have an annoyingly short hosel height compared to just about everything else I have here. Makes shaft swapping a pain in the Richard. Can't match up length with anything easily.
I’m trying to measure here. Here it is next to zx7. What are you comparing to where there is a difference?

50D98821-63ED-462A-8227-609B1C052971.jpeg
 
I’m trying to measure here. Here it is next to zx7. What are you comparing to where there is a difference?

View attachment 9017964
Yeah, ZX7 is the one that matches here, but my ZX already have the shaft I want in them, so I don't want to pull them. It's a 1/4" short compared to my Apex TCB and MB's, P7MC, my Honma's, little bit on the ones from most others too.. It looks like it'd be a straight swap from '19 Pros, but I don't want to play any of the shafts I had in those right now. Basically everything else I game right now is at least 1/4" longer and it's annoying me. Lol. Because I play +1/4, but would almost prefer +1/2, but +1/4" works out so easy for swing weight for me usually.

The shafts that were in the '21 Pros will work out great for me playing long in another set, it's the other direction that's frustrating me right now.
 
Yeah, ZX7 is the one that matches here, but my ZX already have the shaft I want in them, so I don't want to pull them. It's a 1/4" short compared to my Apex TCB and MB's, P7MC, my Honma's, little bit on the ones from most others too.. It looks like it'd be a straight swap from '19 Pros, but I don't want to play any of the shafts I had in those right now. Basically everything else I game right now is at least 1/4" longer and it's annoying me. Lol. Because I play +1/4, but would almost prefer +1/2, but +1/4" works out so easy for swing weight for me usually.

Interesting. Im measuring against Honma and MB right now and its barely shorter. I will grab a TM and check that shortly.
Do you have any pics? Obviously hosel length changes some based on iron style, but 1/4" vs some seems high.
 
Interesting. Im measuring against Honma and MB right now and its barely shorter. I will grab a TM and check that shortly.
Do you have any pics? Obviously hosel length changes some based on iron style, but 1/4" vs some seems high.
20210722_140249.jpg

Not there right now, but I have this one I took of the TCB and Apex Pro for a friend. Most of my others are pretty spot on with the TCB's. They are probably more in line with that type of club though. I've cleared out a lot of my stuff similar to the pros. One of them was waaay longer though. Think it was Honma blades.
 
never thought I would pay too much for a shaft, let alone more than most whole drivers I've purchased in the past, but immgiving this a try. Purchased new, added a Ping adapter to put into my G425 Max

20210722_171248.jpg20210722_171257.jpg20210722_171303.jpg
 
20210723_095930.jpg20210723_100112.jpg

Little clean up and I should actually be to play this afternoon.

.. in 100 degree heat.. on a busy Friday.. 😕
 
Oh….a lot. :LOL:

Nippon 115X Proto out of Miura CB57 and into Mizzy 921F

Recoil 110F5 out of Mizzy 921F

Ventus HB 90X Blue into TE C721 Hybrid

My 1 of 1 custom PX shaft into a Mizzy adapter

Nippon Regio MB+ into a Mizzy adapter

ACCRA TZ RPG cut down to 3W and into Mizzy Adapter

LINQ Purple into TM 300 Mini Driver

Kinetixx putter shaft out of WH #1
 
OH! And I moved my M.Craft back to a SNSR Tour grip.
 
Have a LOT of clubs curing right now. Went long cure epoxy this time since they’re not needed immediately.
 
Put this 6 iron together to round out my combo bag
20210723_175727.jpg
 
Last edited:
96143EC2-3A61-454F-A76C-92965FC1BD2D.jpeg
 
Put a GD Tour AD XC in my new Srixon ZX 5 wood.
 
Think I’m going to put the MMTs back in my T100S….give them another go.
 
disassembled, added tip weight to get to d5, added bb&f ferrule, changed "star" paint full to match ferrule, shorted shaft to play at 35", added new grip. You know, the usual.
20210731_085906.jpg20210731_085855.jpg
 
20210803_222611.jpg

Grip choice for the new Riptide.. :unsure:
 
20210804_001143.jpg20210804_001004.jpg

Blackout Tour Velvet 360 it is.
 
Last edited:
TM mini one with the Diamana OG shaft
 
5CD315DF-3F7A-47C3-84E5-8C0F268694BF.jpeg7D494E42-CD99-46DB-92B6-AF89463FD2FA.jpeg1CB1A03F-93BE-40BC-8417-CD262E74B977.jpeg
 
New 50
 

Attachments

  • 20210805_092631.jpg
    20210805_092631.jpg
    25.6 KB · Views: 19
  • 20210806_062532.jpg
    20210806_062532.jpg
    118.9 KB · Views: 19
Back
Top