If you got that notice yesterday you should be getting your order tomorrow or Saturday. I have been getting recent orders from Golfworks 3 day from order date.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
If you got that notice yesterday you should be getting your order tomorrow or Saturday. I have been getting recent orders from Golfworks 3 day from order date.
It should be fine. You could even get the M890 and experiment with the new design.I am putting together a set of Ke4-S irons in 5 thru GW and have all on hand except 7i which is on backorder and not expected until early to mid-May. Trying to decide what to use temporarily in place of the 7. I do have a few of the L Tech irons and the 6i L Tech is very close to same spec. as Ke4-S 7i. Wondering how that may work for the interim.
I am putting together a set of Ke4-S irons in 5 thru GW and have all on hand except 7i which is on backorder and not expected until early to mid-May. Trying to decide what to use temporarily in place of the 7. I do have a few of the L Tech irons and the 6i L Tech is very close to same spec. as Ke4-S 7i. Wondering how that may work for the interim.
Email sent.I have a KE4S 7 iron head sitting on my bench. Want it?
EMail me at nathaniel321@yahoo.com
Those are a really great head. Keep pace with anything made. Don't be afraid to tinker with the sole weight and experiment with swing weight.Winter weather delayed shipment, but my KE4 driver finally arrived!
Took some 80% swings into my net. Feels pretty good, and I like the sound.
Think I made a good decision having it cut down by an inch. Feels like I have a bit more control over the head than my old driver. I’m going to have to get it on the range this week to see some ball flight.
View attachment 8994519
View attachment 8994520
View attachment 8994521
What length do you decide on? I’ve been investigating options for a 43 or 43 1/2 driver. I pulled my old Wilson Staff 4 wood out, probably my all time favorite club, and measured the swing weight at D0.5 so I now realize I don’t need as much swing weight as I’ve been playing lately.Winter weather delayed shipment, but my KE4 driver finally arrived!
Took some 80% swings into my net. Feels pretty good, and I like the sound.
Think I made a good decision having it cut down by an inch. Feels like I have a bit more control over the head than my old driver. I’m going to have to get it on the range this week to see some ball flight.
View attachment 8994519
View attachment 8994520
View attachment 8994521
What length do you decide on? I’ve been investigating options for a 43 or 43 1/2 driver. I pulled my old Wilson Staff 4 wood out, probably my all time favorite club, and measured the swing weight at D0.5 so I now realize I don’t need as much swing weight as I’ve been playing lately.
I order heads, shafts and supplies from them every month. I get all of my supplies within 3 days. When you place an order you receive an email confirmation. On the confirmation email it will list anything that is back ordered.There may not be many reviews because they're hard to buy from. I've placed 2 orders now for assembled DBM irons about 6 months apart. Both times I got a reply email that one of the components was out of stock (grip) and the order cancelled, even though everything shows in stock on the web page. Also tried to order the Moment X tour putter pak and the grip for that was backordered 3+ weeks despite showing in stock on their website.
I've never tried to do business with a company and not had them attempt to save a significant sale by offering a substitution or following up in some way other than if you don't let us know you want to wait the order will be cancelled.
If you are having issues such as this I'm not sure why you are stopping with your first point of contact and not having your issues resolved.
I can understand your frustration at a pak that did not ship because of a back ordered item. But if you read your confirmation email it's all right there.
Why the heck didn't they offer a solution like a similar grip that they do have in stock so they could get me the clubs?
Ehh, same thing happened to me with Cleveland/Srixon in January. Putter grip back ordered so it took 6 weeks for them to ship me the putter. Once they finally shipped me the putter, it was right handed instead of left handed. Sent it back and the left handed putter is backordered for 4 months. All was available on website. Hopefully I'll get it by the end of April. I think Lamkin (and everybody) are having major supply issues.This is from their email.
NOTE: the grips on both the putter and irons are backordered and due the end of this month.
If you do not respond within 10 business day your order will be cancelled.
I know it's all right there in the confirmation email. I'm stopping at the first point of contact because I've run my own business long enough to know it's not the customer's responsibility to find solutions to a businesses error. I replied to the confirmation email asking for substitution options a couple days ago and have heard nothing yet. Why the heck didn't they offer a solution like a similar grip that they do have in stock so they could get me the clubs? Most companies will follow up with a solution to a problem instead of what feels like indifference.
A third order that I had forgotten about was an order I tried to place months ago for the PTM DBM dark iron pak assembled. Although I asked the question about their ability to bend them 1* upright and if it was included in the $40 build fee in the Q&A they have down near the bottom of their listing page, and got an official answer there that it could be done, before ordering I got a curt confirmation email that in fact they couldn't be bent and the order was being cancelled.
I order a lot of things online and simply don't ever have these issues where the website availability is wrong, or the info you got about a product was wrong and you have to spend time on the phone or your out of luck. I can't be the only one this happens to and it seems reasonable to suspect that is why they're not more mainstream popular and garner more reviews on the forums despite their product quality being top notch.
If they have a great product, but aren't sticky because they're not easy for new customers to do business with, it's no surprise they stay small and there aren't a lot of reviews. If Taylormade or Callaway was run like that they wouldn't be widely known either.
I ordered garage doors in early December and was told March delivery. My installer contacted me Saturday and told me delivery is now June. Talk about supply chain issues.Since Dicks took over they are not what they once were customer service wise, but did you call them?
Also, with COVID19, everyone is having supply chain issues.
I built a Maltby Moment x putter for someone who then stiffed me. It’s new, never used, with headcover. So if anyone is looking for a good deal send me a PM.
I am just curious if anyone here has the ISO-T driver. I don't hear much about them and Golfworks currently has a sale on their paks.
Very hot head, but not as forgiving as the other drivers. And lower launching. My sons alternate using it when they’re home and it works great, but they are both ex college Dlinemen so they can move itI am just curious if anyone here has the ISO-T driver. I don't hear much about them and Golfworks currently has a sale on their paks.
Never heard of a back up? Or over drafting? If you like a mallet with a double bend shaft, this is a great putterI knew as soon as I bought a putter someone would be looking to sell one of these!