Golfworks is only 2.5 hours from me. If I ever get a free day I want to take a trip down there. Hopefully I'd get to hit some of their clubs, but even just looking around would be pretty cool.
Why aren't there any Maltby club reviews?
tehuti
Well-known member
I bought a Gen1 6 iron when they originally came out and didn't like it at all. I hope the Gen 2 is better.
From my understanding nothing was changed as far as design just the color combo to match there new look.
Mind me asking what you didn't like about it?
Fatshot
Well-known member
Just got an incredible deal on a partial set of TS3 heads (8-9-PW-GW). Lightly used, in mint condition.....they did have about 1/4 inch of epoxy that I had to drill out from the the bottom of the bore. (I guess the previous owner was trying to increase the bottom of the bore to ground measurement to soften shaft flex). After boring it out, I just
soft-stepped the shafts when I installed them. I used the Gap Wedge in my round yesterday, and it was AWESOME......hit several good shots with it. I just finished
shafting up the 8-9-PW, and I will practice with them over the weekend to prepare for next week's round. Super excited to see how they work out!
soft-stepped the shafts when I installed them. I used the Gap Wedge in my round yesterday, and it was AWESOME......hit several good shots with it. I just finished
shafting up the 8-9-PW, and I will practice with them over the weekend to prepare for next week's round. Super excited to see how they work out!
Let’s see some pictures!
Fatshot
Well-known member
Will try to get some pix up in a day or so.....!
@Coulter is trying to start his own website - Only Maltbys
I was a breath away from ordering a new 54 degree wedge a few minutes ago lol
I have a Max Milled 54 and it's excellent.
I was looking at the DRT with the DBM finish in the all purpose grind.
Wantacigar
Well-known member
Have you played the DRT yet? I have the MM in 58 with1.05 sole and 54 with the .90 sole. Was wondering if the DRT A grind is comparable, better, etc?
No sir.
I was going purely off preferred look and website explanation of who the grinds work best for
ger21
Well-known member
I've played a 56° DRT-A all summer, but just ordered a 56° and 62° in the Shallow grind.
DRT-A is a great wedge from bunkers, and any shots with a square face. But it's lacking a bit when you need to open the face up around the greens. Not as versatile as some other wedges I've used in the past.
With a little more relief, the S should be exactly what I want.
I may be fast tracking this as I determined that my current 54° has seen better days based off my time at the driving range today.
Ordered a TS1 IM 8 iron today to build. It says it will be here Saturday. This should be fun!
Last edited:
It arrived today as expected. Put it on a recoil 460 ESX F2, built it + 1/2" and put a jumbo Golf Pride tour velvet on it. It came in at D0 swing weight and I was a little surprised by that with a 60g shaft, I figured it would be more C7-C9 maybe. Only was able to hit it 3 times during my round, one was the first swing of the day with no warm up. I hit it on the toe and missed every groove on the face. I hooked it 2 of the 3 times but the one time I hit it well it was pure, had a nice flight and sounded great. Im going to flatten it a couple degrees to help with the hook and try it again next time. Its a beautiful club!
Love it!It arrived today as expected. Put it on a recoil 460 ESX F2, built it + 1/2" and put a jumbo Golf Pride tour velvet on it. It came in at D0 swing weight and I was a little surprised by that with a 60g shaft, I figured it would be more C7-C9 maybe. Only was able to hit it 3 times during my round, one was the first swing of the day with no warm up. I hit it on the toe and missed every groove on the face. I hooked it 2 of the 3 times but the one time I hit it well it was pure, had a nice flight and sounded great. Im going to flatten it a couple degrees to help with the hook and try it again next time. Its a beautiful club!
Nice looking stick there!It arrived today as expected. Put it on a recoil 460 ESX F2, built it + 1/2" and put a jumbo Golf Pride tour velvet on it. It came in at D0 swing weight and I was a little surprised by that with a 60g shaft, I figured it would be more C7-C9 maybe. Only was able to hit it 3 times during my round, one was the first swing of the day with no warm up. I hit it on the toe and missed every groove on the face. I hooked it 2 of the 3 times but the one time I hit it well it was pure, had a nice flight and sounded great. Im going to flatten it a couple degrees to help with the hook and try it again next time. Its a beautiful club!
- Joined
- Jul 10, 2020
- Messages
- 371
- Reaction score
- 388
Can anybody compare the TS4 to the TS1 IM?
Thinking about building a couple of these gradually over the course of the winter to eventually have a full set, just looking for info on these, and what you’re comparing them to/your normal set
Thinking about building a couple of these gradually over the course of the winter to eventually have a full set, just looking for info on these, and what you’re comparing them to/your normal set
My buddy is seriously considering KE4 Max irons after trying the 7 iron I ordered. He's hit it well consistently.
Those look great!
Seriously great irons! They are so consistent and provide some great number for almost everyone ive seen use them. As long as you enjoy a rounded shiny iron head it is solid! Just wish it felt a little better as you can 100% tell it is cast.
I happen to have a 7i head if you are interested.... Sell it cheap as it just sits. Bought it for testing purposes and didnt perform well for me and only hit indoors.
I cant personally speak on the TS4 as I've never hit them but I imagine they would feel alot like my TS3's but possibly more "solid" due to the fact that they have no cavity or extra perimeter weights. Soft yet responsive feel so a really good club for a better player or someone looking to do a combo set in the lower irons like 8 or 9-wedge.
The TS1-IM I have tested against the TS3, STi2 G2, & KE4 Max all with the same loft/lie/shaft. the TS1-IM felt almost identical to a TM P790 but softer. The face is very responsive and fast feeling. In my experience the TS1-IM provided a lower flight and spin then the irons it was tested against. If you are looking for a hollow body foam filled iron with a forged feel I would 100% recommend it. Also as mention above I do have a 7i head I can sell on the cheap that was only hit indoor for testing.
Im interested to see what the KE4 Forged head looks like.