- Thread starter
- Staff
- #4,726
Has anyone used a counter core SS grip with a Tank Cruiser putter?
It'll work as a nice replacement.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Has anyone used a counter core SS grip with a Tank Cruiser putter?
It'll work as a nice replacement.
But the counter core weight will not fit in it.
Just the tip making it into the hole?
So, basically I cant use the counter core weight with the Tank Cruiser, right?It's different screw portions. There is something down in the grip that the tank cruiser grips weights screw into, while the one that comes with the counter core SuperStroke grip screw right into the top of the grip.
Has anyone used a counter core SS grip with a Tank Cruiser putter?
So, basically I cant use the counter core weight with the Tank Cruiser, right?
I ordered a counter core SS grip. Was going to put it on my Works Tank Cruiser, but the Counter Core weight is too big to go in to the shaft.Does the cruiser come with the counter core grip and reg tank doesnt
It looks like there is a "1" or a "2" in the top middle on the inside of the box that the weights come in. Can anyone confirm this of it isn't too much trouble?
Sent from my SM-N910V using Tapatalk
Yours had a 1 in the center, which model did this come with?
This the weight kit for the metal X milled
Yours had a 1 in the center, which model did this come with?
I ordered a counter core SS grip. Was going to put it on my Works Tank Cruiser, but the Counter Core weight is too big to go in to the shaft.
I figured it out when I went to look at the diameter of the putter shaft and noticed that with the weight port it is smaller than a normal putter shaft.Well that sucks. How did you figure that out?
Here are some pics... seems the number inside doesn't notated much... all 4 boxes are for #7. Milled collection, 777, mxm, and another 7 (I forget which). 3 of them have 2 inside, one have 1. They are all same size weight. Then look at the weight from mxm #2 (which I don't have kit for)Yours had a 1 in the center, which model did this come with?
I figured it out when I went to look at the diameter of the putter shaft and noticed that with the weight port it is smaller than a normal putter shaft.
Doubt it, since the plug that the Tank Cruiser weight goes in to comes out pretty easily.I wonder if they don't want a counter weighted grip on the Tank. I wonder mid they would really throw the putter off since it's already heavy?
Hate when that happens.Just the tip making it into the hole?
Little ding on the topline but I'll find the courage to move on.
Haha I'll post a pic of full collection. Quite a few lolKang's weight box collection is almost as impressive as his putter collection hahahaha
:clapp:Haha I'll post a pic of full collection. Quite a few lol