Odyssey Putters Thread

chpar4 · Mar 2, 2016

mike1950 said:
Got a 1W tank cruiser from CPO. Listed as like new. Had original plastic on grip. It IS new. Now I just need to find a weight kit. Asked CPO and they said if they had one, would include it. Guess they didn't. Weight kits aren't very interchangeable, right?

I may have any extra one I'll check when I get home. Give me an hour or so.

Sent from my SCH-I545 using Tapatalk

mike1950 · Mar 2, 2016

chpar4 said:
I may have any extra one I'll check when I get home. Give me an hour or so.

Sent from my SCH-I545 using Tapatalk

That would be awesome. Thanks

chpar4 · Mar 2, 2016

mike1950 said:
That would be awesome. Thanks

And look what I found. Has 10's and 20's and only the 30 G grip weight. But your welcome to it. Just PM me your address and I'll send it tomorrow. It's from a V Line but I think all the Cruiser weights are interchangeable.

Sent from my SCH-I545 using Tapatalk

Girardcorp · Mar 2, 2016

Good thing I have a THP mallet headcover because the one from cpo is a dog. Otherwise my putter looks great!

Sent from my iPad using Tapatalk

chpar4 · Mar 2, 2016

Girardcorp said:
Good thing I have a THP mallet headcover because the one from cpo is a dog. Otherwise my putter looks great!

Sent from my iPad using Tapatalk

Yeah the generic that comes with them are just that. But heck for the condition of everything I've ever purchased that ok. I'm heading there now to see what they have.

Sent from my SM-G900V using Tapatalk

Mmaynard11 · Mar 2, 2016

Girardcorp said:
Good thing I have a THP mallet headcover because the one from cpo is a dog. Otherwise my putter looks great!

Sent from my iPad using Tapatalk

Lmao. GregDan and I were looking at my MXM7 and he said what kind of head cover is that? Just glad my Buckets cover arrived.

Not only did he point out that it appears the wrong weights are in the bottom.

Girardcorp · Mar 2, 2016

mmaynard11 said:
Lmao. GregDan and I were looking at my MXM7 and he said what kind of head cover is that? Just glad my Buckets cover arrived.

Not only did he point out that it appears the wrong weights are in the bottom.

I should have a PGA cover from whistling on the way.

Sent from my iPhone using Tapatalk

Mmaynard11 · Mar 2, 2016

Girardcorp said:
I should have a PGA cover from whistling on the way.

Sent from my iPhone using Tapatalk

One of my favorites.

GregDan · Mar 2, 2016

mmaynard11 said:
Lmao. GregDan and I were looking at my MXM7 and he said what kind of head cover is that? Just glad my Buckets cover arrived.

Not only did he point out that it appears the wrong weights are in the bottom.

Let me go look at mine and see if they are like that. But I'm pretty positive they aren't supposed to be.

TMax14 · Mar 2, 2016

Misike said:
Nice! That's the one I'll be rolling this season. I've spent limited time with it outside, but hours of inside putting this winter. It's been really easy for me to line up putts with the 2-ball design. Also easy to start putts on my intended line. Have a feeling this one will be staying in the bag for awhile.

PowerCobra98 said:
That's the most stable putter I've ever used. The design just naturally resists twisting on the back swing. Perfect putter for me would be that design in a milled version.

I'm looking forward to giving it a try. Should be here in time to get in a round next Monday or Tuesday.

Harvmp28 · Mar 3, 2016

So I got my hands on a MXM #6 the other day, and the yellow green just isn't for me, black and red will suit my bag way better. It's a little short for me too so I ordered a black shaft and a paint fill bottle because the Odyssey swirl is a little tighter than what I'm used to paint filling with toothpicks. So here's where I'm after stripping it of the yellow green and painting the weight notches. Oh and I can't wait to slap the new SuperStroke GT 1.0 Pistol on this thing!

Sent from my iPhone using Tapatalk

Ricky_davis13 · Mar 3, 2016

That looks badass!

Girardcorp · Mar 3, 2016

Yea, so that pistol grip definitely has to come off my #7. Good thing SS sent me a free countercore 3.0. Going to give that a whirl and see if my putting improves. It's so much easier to line up putts for me with this putter.

TMax14 · Mar 3, 2016

Which size SS grip comes stock on the fang 2 ball? Just trying to decide if I'm going to play it as is or go ahead and order a flatso 2.0 countercore for it.

Sent from my SM-G900V using Tapatalk

chpar4 · Mar 3, 2016

This followed me home today. With the 3.0 SS can't wait to get this on the course. Such a buttery soft feel.

Sent from my SM-G900V using Tapatalk

TMax14 · Mar 3, 2016

I couldn't play this afternoon due to the weather so I went to DSG and rolled the 2 ball fang since I've got one on the way. From the few minutes I spent with it I'm not regretting my impulse purchase at all. Undecided how I feel about the SS 3.0.

Alez367 · Mar 4, 2016

Ok this might sound a bit weird but has anyone been able to bend the front press out of the putter before? Reason I ask is I was trying it the 7 white hot RX last night and at address the shaft just leans too far forward for my taste

Sent from my iPhone using Tapatalk

Pringles · Mar 4, 2016

Harvmp28 said:
So I got my hands on a MXM #6 the other day, and the yellow green just isn't for me, black and red will suit my bag way better. It's a little short for me too so I ordered a black shaft and a paint fill bottle because the Odyssey swirl is a little tighter than what I'm used to paint filling with toothpicks. So here's where I'm after stripping it of the yellow green and painting the weight notches. Oh and I can't wait to slap the new SuperStroke GT 1.0 Pistol on this thing!

Sent from my iPhone using Tapatalk

Hey how did you strip the paint off the green weight holders? Also what kind of paint did you use to change it to the the color? Want to change mine to all black

Sent from my SM-N910V using Tapatalk

Harvmp28 · Mar 4, 2016

Pringles said:
Hey how did you strip the paint off the green weight holders? Also what kind of paint did you use to change it to the the color? Want to change mine to all black

Sent from my SM-N910V using Tapatalk

I didn't strip the green weight holders, I just painted a thin coat of testors enamel on top and just barely over the edges that way when it's in the putter and with the screw in you can't see any green

Sent from my iPhone using Tapatalk

X.Man · Mar 4, 2016

Saw these at Doral today. That mallet was something else!

Alez367 · Mar 4, 2016

X.Man said:
Saw these at Doral today. That mallet was something else!

I practically fell off my chair seeing that first putter! :clap: That is a beauty

kc720 · Mar 4, 2016

X.Man said:
Saw these at Doral today. That mallet was something else!

Definitely rare putters!

Cdpkook132 · Mar 4, 2016

X.Man said:
Saw these at Doral today. That mallet was something else!

Those are sick!

Sent from my Verizon iPhone using Tapatalk

tpluff · Mar 4, 2016

If I ever see a #9 HT mystery milled putter, I will be taking it home.

mr.hicksta · Mar 4, 2016

SS Pistol GT 2.0 installed and ready to roll!

Odyssey Putters Thread

Well-known member

New member

Well-known member

Well-known member

Well-known member

Grandaddy Captain Alumni

Well-known member

Grandaddy Captain Alumni

#DreamTeam

New member

Active member

College Student

Well-known member

New member

Well-known member

New member

Formerly Carlos C.

waywardpoints

Active member

Well-known member

Formerly Carlos C.

Active member

Active member

I <3 GAWLF

Golf->Tacos->Gainz