- Staff
- #1
The following is a press release:
PHOENIX (January 11, 2016) – Developing knowledge and drawing inspiration from sources as diverse as dragonfly wings and 18-wheelers, PING today launched its new G series of drivers, fairway woods, hybrids and irons, again advancing speed, distance and forgiveness to unprecedented levels without sacrificing other performance attributes. This year PING went one step further, creating a new club category with the G Crossover, combining the best of hybrid and iron technology.
The new products, which are all custom fit and built to precise specifications, can be pre-ordered beginning today at PING-authorized golf shops around the world.
“It’s a credit to the imagination and the disciplined approach of our engineering, design and research teams that we’ve elevated performance across every category in new and exciting ways, innovation that will make the game easier for golfers of every ability level,” said John A. Solheim, PING Chairman & CEO. “Our design process is different, as we gather information from the world around us, study new materials, and test rigorously to make sure our products give golfers meaningful results. The process leads to breakthroughs like Dragonfly Technology and Vortec Technology, found in the G drivers. We’ve also created a specialized heat-treatment process and COR-Eye Technology to make the G irons longer, higher-launching and more forgiving, a combination that’s very difficult to achieve. And with the new Crossover product line, an entirely new category, there’s a lot to be excited about.”
G Drivers (Standard, LS Tec, SF Tec)
A close-up photograph of a dragonfly taken by Solheim was the inspiration for the primary innovation in the driver. Solheim was intrigued by the wing structure and shared the photo with a group of engineers. Inspired by biomimicry, an approach to innovation that emulates nature’s time-tested patterns, they created Dragonfly Technology. The complex exoskeleton design yields PING’s thinnest (0.43 mm) and lightest crown to date, saving eight grams while creating an intricate and stable structure. The weight savings helped drive the center of gravity lower and deeper than any PING driver, increasing dynamic loft and elevating MOI significantly for maximizing distance and forgiveness.
Researchers also studied the base flaps that minimize large-scale vortex shedding behind 18-wheel semi-trailers and integrated their learnings into the G drivers to improve aerodynamics and increase speed. Vortec Technology on the back of the club and turbulators on the crown contribute to reducing drag 37% in the impact zone, yielding greater clubhead speed and ball velocity for measurable distance gains from all swing speeds. The variable-thickness T9S face has a high strength-to-weight ratio, allowing for a thin face to increase ball speed.
Golfers can optimize launch conditions prior to a round by adjusting loft up to [SUP]+[/SUP]/[SUB]-[/SUB] 1º with five settings utilizing a lightweight, aerodynamically efficient and high-strength 7075 aluminum hosel sleeve.
The G SF Tec driver is custom-engineered with weight closer to the heel to produce a right-to-left shot bend (for right-handed golfers) and steer the ball back into the fairway. The G LS Tec driver features a CG that is extremely low (slightly forward of the standard G driver), for the player who desires low, stable spin with forgiveness.
- Lofts 9° & 10.5° in standard and LS Tec heads, 10° & 12° in SF Tec head. Lofts adjustable [SUP]+[/SUP]/[SUB]-[/SUB] 0.6° or 1°.
- Std. Length 45.75", D3, 206g (standard), D4, 207.5g (LS Tec), D1, 203g (SF Tec), 460cc
- Stock graphite shaft: PING Alta 55 (SR, R, S, X); Optional PING shafts ($30 upcharge): Std. length 45.25": Tour 65 & Tour 80 (R, S, X).
- U.S. MSRP $435
PHOENIX (January 11, 2016) – Developing knowledge and drawing inspiration from sources as diverse as dragonfly wings and 18-wheelers, PING today launched its new G series of drivers, fairway woods, hybrids and irons, again advancing speed, distance and forgiveness to unprecedented levels without sacrificing other performance attributes. This year PING went one step further, creating a new club category with the G Crossover, combining the best of hybrid and iron technology.
The new products, which are all custom fit and built to precise specifications, can be pre-ordered beginning today at PING-authorized golf shops around the world.
“It’s a credit to the imagination and the disciplined approach of our engineering, design and research teams that we’ve elevated performance across every category in new and exciting ways, innovation that will make the game easier for golfers of every ability level,” said John A. Solheim, PING Chairman & CEO. “Our design process is different, as we gather information from the world around us, study new materials, and test rigorously to make sure our products give golfers meaningful results. The process leads to breakthroughs like Dragonfly Technology and Vortec Technology, found in the G drivers. We’ve also created a specialized heat-treatment process and COR-Eye Technology to make the G irons longer, higher-launching and more forgiving, a combination that’s very difficult to achieve. And with the new Crossover product line, an entirely new category, there’s a lot to be excited about.”
G Drivers (Standard, LS Tec, SF Tec)
A close-up photograph of a dragonfly taken by Solheim was the inspiration for the primary innovation in the driver. Solheim was intrigued by the wing structure and shared the photo with a group of engineers. Inspired by biomimicry, an approach to innovation that emulates nature’s time-tested patterns, they created Dragonfly Technology. The complex exoskeleton design yields PING’s thinnest (0.43 mm) and lightest crown to date, saving eight grams while creating an intricate and stable structure. The weight savings helped drive the center of gravity lower and deeper than any PING driver, increasing dynamic loft and elevating MOI significantly for maximizing distance and forgiveness.
Researchers also studied the base flaps that minimize large-scale vortex shedding behind 18-wheel semi-trailers and integrated their learnings into the G drivers to improve aerodynamics and increase speed. Vortec Technology on the back of the club and turbulators on the crown contribute to reducing drag 37% in the impact zone, yielding greater clubhead speed and ball velocity for measurable distance gains from all swing speeds. The variable-thickness T9S face has a high strength-to-weight ratio, allowing for a thin face to increase ball speed.
Golfers can optimize launch conditions prior to a round by adjusting loft up to [SUP]+[/SUP]/[SUB]-[/SUB] 1º with five settings utilizing a lightweight, aerodynamically efficient and high-strength 7075 aluminum hosel sleeve.
The G SF Tec driver is custom-engineered with weight closer to the heel to produce a right-to-left shot bend (for right-handed golfers) and steer the ball back into the fairway. The G LS Tec driver features a CG that is extremely low (slightly forward of the standard G driver), for the player who desires low, stable spin with forgiveness.
- Lofts 9° & 10.5° in standard and LS Tec heads, 10° & 12° in SF Tec head. Lofts adjustable [SUP]+[/SUP]/[SUB]-[/SUB] 0.6° or 1°.
- Std. Length 45.75", D3, 206g (standard), D4, 207.5g (LS Tec), D1, 203g (SF Tec), 460cc
- Stock graphite shaft: PING Alta 55 (SR, R, S, X); Optional PING shafts ($30 upcharge): Std. length 45.25": Tour 65 & Tour 80 (R, S, X).
- U.S. MSRP $435