claytushaywood
Member
Hey I'm trying to figure out what shaft tip weights I may need to order to get my swing weights in order for the new shafts I'm putting on my bridgestone j38's.
So... I emailed KBS to try to find out what the raw lengths and weights of their KBS tour 90 shafts are in .355" taper tips- they just sent me back an email saying "95g stiff 102g" but the taper tips come in a different stock length depending on what specific iron shaft you order- the 2 iron comes raw length of 41" or something and PW at like 37" but I cant find any info in between- do they all weigh 95g uncut? surely they don't?
anyways- what values do you all think I should use on these pre build swing weight calculators. I'm going to have to add some weight for sure as it is because they're showing some pretty low numbers.
I got the bridgestone heads weighed at...
4 iron 244g
5i 252g
6i 259.5g
7i 266.4g
8i 274.4g
9i 282g
PW 287g
When I pulled old shafts they had 1/2" extensions and 3g tip weights in 4-7i 2g in 8i-9i 1g in PW.
I'd like somewhere around D1-D2 with 54g grips (just as an average so Ill have a little room if I go heavier or lighter with grips)
Again- main questions are- what values do I use for uncut shaft length (raw length?) and uncut weight for the KBS Tour 90 .355" taper tip in regular flex.
Thanks!
So... I emailed KBS to try to find out what the raw lengths and weights of their KBS tour 90 shafts are in .355" taper tips- they just sent me back an email saying "95g stiff 102g" but the taper tips come in a different stock length depending on what specific iron shaft you order- the 2 iron comes raw length of 41" or something and PW at like 37" but I cant find any info in between- do they all weigh 95g uncut? surely they don't?
anyways- what values do you all think I should use on these pre build swing weight calculators. I'm going to have to add some weight for sure as it is because they're showing some pretty low numbers.
I got the bridgestone heads weighed at...
4 iron 244g
5i 252g
6i 259.5g
7i 266.4g
8i 274.4g
9i 282g
PW 287g
When I pulled old shafts they had 1/2" extensions and 3g tip weights in 4-7i 2g in 8i-9i 1g in PW.
I'd like somewhere around D1-D2 with 54g grips (just as an average so Ill have a little room if I go heavier or lighter with grips)
Again- main questions are- what values do I use for uncut shaft length (raw length?) and uncut weight for the KBS Tour 90 .355" taper tip in regular flex.
Thanks!