DB86
Active member
I tend to be a Do It Yourselfer, but I need some help from some of you more experienced hackers around here on this one. I have a taylormade R15 driver with a shortened aftermarket shaft and different grip. I believe my swing weight is messed up due to the shaft etc. I'll list the info below and I'd like to know about what the current weight is and what I need to add to get it back to factory "D4 I believe".
On a side note I had an R11s with a similar set up and added 4 grams to the head and that seemed to correct it, but I just made an educated guess.
Thanks for the help see following info.
Driver: R15. 10.5 degree right hand factory shaft was Fuji Speeder 57 Evolution 45.5" with a Lamkin 48g grip.
Installed shaft: Mitsubishi kurokage "factory 66g Stiff 45.25 inches" trimmed to an OAL of 44.25 With a golf pride MCC +4 standard 52g grip.
Thanks in advance for the help. If you need more info please ask.
Sent from my iPhone using Tapatalk
On a side note I had an R11s with a similar set up and added 4 grams to the head and that seemed to correct it, but I just made an educated guess.
Thanks for the help see following info.
Driver: R15. 10.5 degree right hand factory shaft was Fuji Speeder 57 Evolution 45.5" with a Lamkin 48g grip.
Installed shaft: Mitsubishi kurokage "factory 66g Stiff 45.25 inches" trimmed to an OAL of 44.25 With a golf pride MCC +4 standard 52g grip.
Thanks in advance for the help. If you need more info please ask.
Sent from my iPhone using Tapatalk