Just curious. I just obtained a set of Srixon Z565 with Miyazaki shafts and I was holding them next to my Callaway Apex CF16 with XP95 and the Srixon seems to be about 1/4" longer even though both are advertised as the same length and lie settings.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Are you going by what they say the measurement is in inches or whatever, or what it is above standard? I've seen a difference in the "standard" lengths between companies. My Taylormades at 1/2" over "standard" are the same length as my Callaways at 3/4" over. If it's what the actual measurements say that is the same, that would be curious and I would question the setup from wherever you got them from possibly.
Just curious. I just obtained a set of Srixon Z565 with Miyazaki shafts and I was holding them next to my Callaway Apex CF16 with XP95 and the Srixon seems to be about 1/4" longer even though both are advertised as the same length and lie settings.
Do the Callaway's also have graphite shafts?
Good catch. Sometimes graphite shafted clubs are built to different specs in regards to length.Do the Callaway's also have graphite shafts?
No, they have the XP95 steel.
I know graphite shafts tend to be a little longer standard that steel. Even if the steel to steel ratings say they should be the same length in spec, graphite will be a bit longer.
At least that's what I understood to be the case, maybe I'm mistaken.