- Admin
- #1
As many have seen over the last few weeks, the THP Events calendar is full of incredible opportunities and if you missed the full schedule, you can find it here. Adding to that list is the greatest shaft event ever created hitting California called The HandCrafted Experience w/ Project X.
Episode 1 of Lab Rats w/ Don Brown
Qualifying
THP Events are held throughout the year and are incredibly unique ways to share a round or weekend with THPers and are filled with equipment, prizes and more. Your ticket to enter these events is the 2017 Albatross Club membership which goes to help a wonderful charity and for more information on that, click here.
#TheHandCraftedExperience
There will be some surprises
The experience will begin about a month before the event where you will get a shaft sent to you from Project X. This is called your baseline shaft and your job will be to test it out and take some notes for a few weeks about what you like and what you would change.
Once the event begins at Project X Headquarters, there would be a tour and then you will sit down with the experts and design your own shaft. Based on the current feedback as well as the performance notes from your baseline shaft, adjustments to flag sizes, material angles and more would be made. You will get to see torque, frequency, tip deflection change as your design gets adjusted. It might sound overwhelming, but trust me when I say with the team in place, this will be an unforgettable experience. You will be designing all of the properties of your shaft with the person that designs all of the Project X shafts that are created. This is the experience even tour players do not get done.
The next day would begin at Project X Headquarters again as you watch your design get hand rolled and put into the oven. Then its off to graphics. Here you will work on design and color options for your completed project.
Cost
This is open to 7 THPers
The cost for the event is $299
This includes:
*Custom Shaft - You will create a 1 of 1 made specifically for you, by you.
*Round of Golf at Barona Creek Golf Course
*Greens Fees
*Range Balls
*SWAG SWAG SWAG
Two Incredible Dinners with the group and team.
*Contests
*And More
When & Where
August 3rd & 4th (this is a Thursday & Friday)
San Diego, CA
Project X Headquarters
Itinerary
Thursday AM - Arrive at Project X HQ for the day.
Breakfast will be there.
Get the tour and then shaft knowledge and creation begins.
Thursday PM - Lunch at their office
Thursday PM - Continue creating shaft.
Thursday Evening - Dinner & Drinks at local Brewery in a private room
Friday AM - Project X HQ - Finish design process of your shaft
Friday PM - Golf at the beautiful Barona Creek Golf Course
Friday PM - Private Dinner at the casino attached to Barona Creek Golf Course
Lodging
While this is not a stay and play event, we know that many THPers will be traveling in and will look for a place to stay. Once the signup is complete, we can coordinate and assist the best options based on location for the events of the week.
Participants
Mark_UK
kc720
SouthernShred
AudioClyde
emart2173
mikeg_74
cbaker2882
Episode 1 of Lab Rats w/ Don Brown
Qualifying
THP Events are held throughout the year and are incredibly unique ways to share a round or weekend with THPers and are filled with equipment, prizes and more. Your ticket to enter these events is the 2017 Albatross Club membership which goes to help a wonderful charity and for more information on that, click here.
#TheHandCraftedExperience
There will be some surprises
The experience will begin about a month before the event where you will get a shaft sent to you from Project X. This is called your baseline shaft and your job will be to test it out and take some notes for a few weeks about what you like and what you would change.
Once the event begins at Project X Headquarters, there would be a tour and then you will sit down with the experts and design your own shaft. Based on the current feedback as well as the performance notes from your baseline shaft, adjustments to flag sizes, material angles and more would be made. You will get to see torque, frequency, tip deflection change as your design gets adjusted. It might sound overwhelming, but trust me when I say with the team in place, this will be an unforgettable experience. You will be designing all of the properties of your shaft with the person that designs all of the Project X shafts that are created. This is the experience even tour players do not get done.
The next day would begin at Project X Headquarters again as you watch your design get hand rolled and put into the oven. Then its off to graphics. Here you will work on design and color options for your completed project.
Cost
This is open to 7 THPers
The cost for the event is $299
This includes:
*Custom Shaft - You will create a 1 of 1 made specifically for you, by you.
*Round of Golf at Barona Creek Golf Course
*Greens Fees
*Range Balls
*SWAG SWAG SWAG
Two Incredible Dinners with the group and team.
*Contests
*And More
When & Where
August 3rd & 4th (this is a Thursday & Friday)
San Diego, CA
Project X Headquarters
Itinerary
Thursday AM - Arrive at Project X HQ for the day.
Breakfast will be there.
Get the tour and then shaft knowledge and creation begins.
Thursday PM - Lunch at their office
Thursday PM - Continue creating shaft.
Thursday Evening - Dinner & Drinks at local Brewery in a private room
Friday AM - Project X HQ - Finish design process of your shaft
Friday PM - Golf at the beautiful Barona Creek Golf Course
Friday PM - Private Dinner at the casino attached to Barona Creek Golf Course
Lodging
While this is not a stay and play event, we know that many THPers will be traveling in and will look for a place to stay. Once the signup is complete, we can coordinate and assist the best options based on location for the events of the week.
Participants
Mark_UK
kc720
SouthernShred
AudioClyde
emart2173
mikeg_74
cbaker2882
Last edited: