Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
IIRC you said you pretty much open the face on every shot around the green with your 60, so I think tour grind would make some sense.I'm going 52/56/60 for certain.
Not sure on color yet, but leaning towards black.
Also debating if I want to go with the tour grind on the 60.
Yeah I do.IIRC you said you pretty much open the face on every shot around the green with your 60, so I think tour grind would make some sense.
same thoughts over here... you can still play any shot around the green with a 60* no matter what grind it has. I don't want to make it harder to hit from the fairway if neededYeah I do.
I also use the 60 for a lot of full, 3/4, and 1/2 swings so versatility is my number one concern. I'd hate to turn my 60 into a one trick pony so I'm leaning towards a traditional grind.
Yeah I do.
I also use the 60 for a lot of full, 3/4, and 1/2 swings so versatility is my number one concern. I'd hate to turn my 60 into a one trick pony so I'm leaning towards a traditional grind.
I modified my original thoughts and ordered them in black, 52*, 56* and 60*. Got a tour grind on the 60 and traditional on everything else. I was going to get the tour frosted, which look fantastic, but this weekend I had some issues with my current Nike wedges being hard to aim due to glare and though maybe black would help in that area.
I told you bro, stealth clubs are going to be fantasticI modified my original thoughts and ordered them in black, 52*, 56* and 60*. Got a tour grind on the 60 and traditional on everything else. I was going to get the tour frosted, which look fantastic, but this weekend I had some issues with my current Nike wedges being hard to aim due to glare and though maybe black would help in that area.
Great looking wedge! Really like the colorMy 50* arrived yesterday. It looks great and it arrived with a nice letter from the Wilson custom works department.
My 50* arrived yesterday. It looks great and it arrived with a nice letter from the Wilson custom works department.
Just got my 50* with the traditional sole yesterday. Went with the traditional with a lower bounce on the 50* to have something easier to hit off the fairway inside my PW range. Should have it out on the course this weekend.
Gee I wonder why you haven't been out to hit it yetI still haven't had a chance to hit mine yet. I'm hoping to get out to the range or course at some point over the next few weeks. I'm thinking it will fit nicely between my PW and a 54*.
Keep us posted on your thoughts.
Gee I wonder why you haven't been out to hit it yet
I really like the 56 that I have.
Haha I hear ya man wife and I had twins this past December.One day I will play golf again. I'm just not sure when that will be:act-up:
First time out with my new wedges. I got a 50 and a 56 (bent to 55) with the tour grind. First thing I noticed was they are heavier than my old Taylormade ATVs. They are also longer in shaft length by 3/4 of an inch (I got then 1/2 long). After a few warm up swings I started by hitting some 25 yard chips with the 55. Nice, smooth feel, again, very different than my ATVs. I had no problem getting dialed in at the range. I moved to a 60 yard target and found a 3/4 ish swing got me on the pin. No problem flighting the ball up or down by moving it up and back in my stance. I then took the 50 and hit shots to 100 yards. Immediately it was clear that this wedge is longer than my ATVs by about 10 yards. Easily dialed in on the 100 yrd flag by choking down a bit. I'm interested to see the spin these will produce with real balls.
I'm really impressed by these wedges and the tour grind will open up lots of options around the green. I'm already pondering adding a 58 or a 60 for the sand.
View attachment 20468
Sent from my iPhone using Tapatalk
Haha I hear ya man wife and I had twins this past December.
The custom work looks great on those. Glad you like them. Did you go with the stock shaft? I ended up going with the C-Taper and plus half an inch as well because it was a minimal upcharge when I ordered it from TGW