For as much focus as golfers give Mizuno for their iron lineups, their wedge game has always been quite strong. That said, they don’t always garner the attention that others do, but the company hopes to change that with their new T22 wedges.
Mizuno T22 Wedges
The T20 was a highly thought of wedge release for Mizuno, one that offered some fun finishes and a decent amount of tech within a sleek forging. But there has seemingly always been a chase for the company in their wedges when it comes to the shape and flow, with the T22 they are once again looking for refinement.
While the T20 was a good performer, visually it just lacked that “smoothness” which many expect from Mizuno. The way the toe sat, the flow into the hosel, the general shaping, these were all things that were good, but perhaps not great to Mizuno’s R&D team. So, what to do? Well, look to the past for inspiration.
Mizuno is looking at the T22 as a blend of the T20’s performance with the lines of potentially the most appealing wedge the company has ever made, the T7. By beveling the top edge, they believe the look is much more traditional in its shaping at setup while they were able to keep the tapered blade styling of the T20 that allowed so much weight manipulation.
So, what you get is a smaller overall footprint and a more compact profile with a classic teardrop shaping that looks like it has a very thin topline because of the way it is beveled. However, you still get the weighting of the T20 which according to Mizuno makes for a more consistent spinning and flatter trajectory.
The Mizuno T22 wedges are Grain Flow Forged using HD Boron and will come in three finishes, Denim Copper and Satin Chrome which will both feature a copper underlayer, and a Tour preferred Raw option. The wedges also showcase Mizuno’s proven laser etched HydroFlow Microgrooves to maximize performance in moisture while the Quad Cut grooves are specifically designed for how each loft is typically utilized.
As is customary for Mizuno, there will be loft options aplenty, especially if you go the custom fit route, and this year the grinds have been bolstered considerably with four specific designs:
S Grind – with minimal sole grind for fuller shots and lower lofts
D Grind – with moderate heel and toe relief, allowing gentle manipulation of the clubface
C Grind – with heavy heel and toe relief for more skilled players and firmer conditions
X Grind – with extreme heel and toe relief for the real short game maestros
Release for the T22 wedges will be October 2021 and will be available in RH and LH (Satin Chrome only) with a price of $159.95 each. For those who cannot wait for information and feedback, several of the THP community members have been sharing their feedback on the new wedges, so be sure to jump into the conversation and share your thoughts while reading theirs!
I understand. Go easier.
I have 2 sets that are compact so I must adjust. No choice.
Typically, hosel rockets can occur when the hands are too far forward at impact, which shows up more on a partial or green side shot. You don’t need lag on those shots, it’s not a speed shot. I just remind myself to relax the arms more and return the loft at impact. Another symptom of hosel rockets is my lead arm separating from the body on the downswing. As one can tell, I am an expert on hosel rockets and their causes. Caused me much pain this summer.
Just reminds me to RELAX the arms and let go of the club head – release it.
Sent from my iPhone using Tapatalk
Agreed
Me, I carry 3 T22s right now (the 48/Gap) anyway, the 38 and PW are one side the 54 and 58 on the other, the 54 and 58 are different lengths how hard can it be?
I hate that this bothers me too. I mean it’s no great bother, but it bugs me that I even have to think about it. I definitely spend more time trying to find and pull the right one with them, and check which one I have in my hands more often at the ball because of that. It’s just an odd placement and I don’t love it.
OUCH! I feel for that club (my 56 snakebite got rock bitten in Vegas, so I get it)
It hasn’t hurt the performance of it though, so that’s nice. I keep expecting it to grab a rock and grind it through a cover or something, but it hasn’t happened yet. I forget it’s all jacked up now when I’m out there unless I see it.
Yeah that sounds simple but playing linksgolf the sand will take it of after a couple of shots. Maybe punch some dots though. But it’s a little thing but a little annoying [emoji23]
Sent from my iPhone using Tapatalk
When the 50 comes in, I’ll put 1776 on it and paint fill them
Finally got around to hitting my 54&58 the other day. Loved the feel and looks. Just wish the 50 would make it lol
If you use the heavier stock shaft, they should come in at D5.
Mine are with the Modus 105 shaft and they came in at D3-3.5. Heavier shaft will get you more. If I want more, lead tape is useful. But they play great.
You know, I was a little worried about the swing weight of the S400. I play the MP-20 HMB with Modus 120 stiff, which is D2-D3. I bought the 54.08D from Ebay, and it came with the stock S400. I can swing it no problem, but there’s definitely a noticeable difference between swinging scoring irons/PW and swinging the 54. I was considering getting an S300, or even a Modus 105, but I ultimately ended up going stock. Since I’m used to playing the S400 in the 54, I figure that it shouldn’t be too bad when the 50 and 58 arrive. Also, I really didn’t want to have a different shaft in the 54 than in the 50 and 58
View attachment 9069029
Man I Can’t wait to get out and hit those beautiful coppers just sitting here.
I have a TINY gripe where I wish the loft was painted somewhere else on the club as well. I know both of my clubs are in the 50s (soon to be a 3rd) but when snatching a wedge from the bag I often have to double check I have the right one. I’m splitting hairs here though – it’s been my favorite wedge I’ve hit to date.
Ill say…
https://www.thehackersparadise.com/forum/index.php?threads/the-2022-victory-cup-with-mizuno.8938140/
I’ve tried all three. I didn’t really decide on the T22 though. Didn’t really decide against it either I guess. They all have their strengths, and I play the T22 often. I like the soles and weight distribution of the MG3 better. More versatile for me. Prefer the compact size and feel of these over the SM9. I think the T22 have more bite than the other two, too. Grind options go to SM9. They’re all good, so it’s just going to be personal preference. What I look for isn’t exactly most common/needed, so it’s MG3, SM9, T22 for me right now, but it’s all crazy close. They’re basically 1a1, 1a2, and 1a3. They’re isn’t even really a B, or 2.
I agree with the swing weight/club weight concern. I play Nippon Modus 105s in my irons and the T22s just don’t seem to flow in. I’m thinking of either changing out the shafts or getting rid of them for something lighter.
View attachment 9070452
I have the inexpensive Golfworks SW Scale – and it seems accurate within .5 with the digital scales.
I have D3 in my Iron PW, and then with the T22, the 50 is D4, the 54 is D4 and the 58 is D3.5 with Nippon Modus 3 105 Stiff Flex a quarter of an inch from each other in length. I can deal with the .5 difference. I really like the C Grind in the 58, D Grind in 54 and S Grind in 50 for my swing.
The Artisans have a Modus 3 105 R flex, with similar quarter inch difference in lengths, and they are D2.5 in 50, D4 in 55, and D4 in 59.
I once had D5/6 in the last 2 wedges and prefer the lighter D3-4 swing weights.
1)bounce # vs reality still confuses the heck out of me
2) the denim copper is still ? and cant wait for mine to show up
Do you play is mostly firm conditions and not too lush?
Can you come in shallow? Not much of a divot? Cut the grass? Take a tiny bit of soil?
If so, Look at S in 50, D in the SW and C in the LW.
Well, then you are a shallow golfer.
X was just not enough bounce for me. I’ve tried less than 7-8 of bounce, but it just does not work for me. Good luck with it. On some days, I’d like to have an X Grind on hand.
About 5 weeks…
While I’d ordered the 50 in chrome, it arrived in copper. Honestly? I ain’t complaining. It’s gorgeous. I’d only ordered the chrome because the 50 is more of a full shot club for me, and I’ve heard tales of the copper wearing quickly when used for full shots. Still, I’m over the moon with these wedges.
Oh I am here sir, I am here
Well, gave them a fair shot, and ultimately am moving on. Look and feel was great, but the bounce was not working for me at all. Going back to wedges with more bounce.
Have a buddy who got them and the bounce didn’t work for him and I think he’s gonna sell his.
The denim copper is awesome but the finish wears really easily. I don’t like the raw (rusty) look so I have to go with Satin chrome.
Think I’m going to struggle with this decision. Probably will play it safe with satin but man that denim copper looks so good. I just don’t do well with wear.
That copper actually makes the feel softly astounding.
I take a light abrasive every now and then to shine and clean.