WTB: Driver shaft with Cobra LTDX or Aerojet adapter

[Newman21]

Looking for a driver shaft for a Cobra LTDX or Aerojet adapter, stiff and 60gram weight at 44 or 44.5" (looking for an overall driver length of 45.5')

Looking for something like the Fujikura Motore X F3 6-s or similar please.

 

[Pops]

Looking for a driver shaft for a Cobra LTDX or Aerojet adapter, stiff and 60gram weight at 44 or 44.5" (looking for an overall driver length of 45.5')

Looking for something like the Fujikura Motore X F3 6-s or similar please.

I have a Tensei Blue raw 65 tipped for cobra if that would interest you. Have a velocity also.

 

[Parrot]

Looking for a driver shaft for a Cobra LTDX or Aerojet adapter, stiff and 60gram weight at 44 or 44.5" (looking for an overall driver length of 45.5')

Looking for something like the Fujikura Motore X F3 6-s or similar please.

I have a Diamana S+ 60(S) (blueboard) that is in that range of shaft. I also have the M+ (redboard) 60 in stiff that is a little higher spinning and launching. Both have Cobra tips at 44-44.5”.

 

[benrd5420]

I have both a Project X HZRDUS Blue and a Ventus Velocore Blue 6s, both with Cobra tips.

 

[Scooby45]

UST M40X Proforce with Cobra tip

 

[Steve V]

Under my listing for "Driver Shafts", there are 3 shafts still available that have Cobra adapters.