chasd3
Banned
I have a set of 4 Callaway X Hot hybrids in reg 3,4,5 & 6. Not the pros but standard. Nice condition used for 1/2 Season. Any thoughts on the whole pkg vs individual sales?
Equipment Appraisal Thread
jjcgolf72
Get in the hole!
RBZ Tour hybrid 18.5 stock stiff TM shaft. And RBZ 3 wood 15 with stock TM stiff shaft, this has a brand new head replaced by TM still in plastic.
Jeff
sent using tapatalk
Jeff
sent using tapatalk
Flowmosapien
i play golf
Barely used Calaway Razr Fit Xtreme Udesign red sole white crown. UST proforce shaft. Bought it for 500 what do you think I could get?
I think what you have it up there for is reasonable. I have a shaft just sitting here with the adaptor on it, half pondering buying the head and then trying to sell the whole setup.
TimG3394
Lost: Center of clubface
Adams a4r 4hy-GW reg stock shafts. 7.5/10.
pkellz25
Active member
Equipment Appraisal Thread
Project x 6.5 shaft with golfpride NDMC grip and callaway adapter? It came with my xhot pro but decided I liked my razr fit shaft better after 2 rounds. Have it attached the razr fit head as of now but would look to see what I could get for it attached and by itself.
Thanks!
Sent from my iPhone using Tapatalk
Project x 6.5 shaft with golfpride NDMC grip and callaway adapter? It came with my xhot pro but decided I liked my razr fit shaft better after 2 rounds. Have it attached the razr fit head as of now but would look to see what I could get for it attached and by itself.
Thanks!
Sent from my iPhone using Tapatalk
Last edited:
XHOT Driver 8/10 or better, 9.5 loft, stock shaft (Project X stiff) headcover/tool included.
mikedean441
6X HOF
Ive been eyeballing some of these on ebay, they have gone for $65-$80
niteowl03
Active member
These seem to be running around 350-400 uncut.
niteowl03
Active member
No prob. Ive been dying to try some, but just cant justify the cost yet!
c0ncept
SFT
- Joined
- Aug 8, 2011
- Messages
- 8,508
- Reaction score
- 20
- Location
- Renton, WA, United States
- Handicap
- Life
Callaway Razr X Forged 5-PW with Miyazaki shafts and brand new secret cord grips. 9/10
seemore m3w
seemore m3w
interested in what you all think this seemore is worth. m3w ss, whistle shaft.
it definitely needs to be cleaned up & brushed off as you'll see in the pics, but it's in great shape overall.
grip is oem seemore that shows wear, but i'm about to put something like a superstroke or winn jumbo on it.
thank you!
seemore m3w
interested in what you all think this seemore is worth. m3w ss, whistle shaft.
it definitely needs to be cleaned up & brushed off as you'll see in the pics, but it's in great shape overall.
grip is oem seemore that shows wear, but i'm about to put something like a superstroke or winn jumbo on it.
thank you!
Attachments
Untouchable
New member
Price check on a TM r1 w/stock stiff shaft...very good condition.
cammyandcarter
New member
- Joined
- Dec 10, 2010
- Messages
- 216
- Reaction score
- 1
- Handicap
- Too much
TM CG15 52. 8/10
Oregon Jack
Let's real 'er back in.
- Thread starter
- #194
Cleveland, not TM, but yeah.. $30 ish?
cammyandcarter
New member
- Joined
- Dec 10, 2010
- Messages
- 216
- Reaction score
- 1
- Handicap
- Too much
TM burner 3w stock stiff shaft w/original headcover
[/IMG]
Sanzabar
Oh So Colt!
Price check on Cleveland Classic XL Custom with Matrix Black Tie 6m3??
Golferbest
New member
Yes! Tracy II played probably 6 rounds then stored.
35 flow neck
Scotty Cameron Newport Pro Platinum. 34 inch used but babied.
/d/14/03/05/da3u4a4y.jpg[/IMG]
35 flow neck
Scotty Cameron Newport Pro Platinum. 34 inch used but babied.
dustin8538
Well-known member
I think a fair price on the yes would be around the $40 range. I bought a yes callie almost new on ebay for around $35. As for the Scotty I would say somewhere around $150 would be a good starting point. Hope this helps
Mango Smash
Active member
I have a couple of iron head sets and some shafts that are just sitting around collecting dust since I picked up my new set. Anyone know what I should try selling these for?
1) 2011 TM TP CB 5-PW w/ SST Pured S400 shafts. Faces are in very good condition.
2) Mizuno MP60 4-PW heads. These are on their way back to me and are like new. Had them redone with a raw finish.
3) Bridgestone J36 CB 4-9 and blade PW heads. In good condition with no browning. The 9i is brand new in the wrapper as the set didn't include it when I bought them.
4) PX 6.5 4-PW soft stepped once. Play over standard by about 1/2" and come with Z cord grips. Labels and ferrules are still in good shape.
5) KBS C Taper 130 X 5-PW soft stepped once. Also play over standard. No grips or ferrules. Labels are in rough condition.
1) 2011 TM TP CB 5-PW w/ SST Pured S400 shafts. Faces are in very good condition.
2) Mizuno MP60 4-PW heads. These are on their way back to me and are like new. Had them redone with a raw finish.
3) Bridgestone J36 CB 4-9 and blade PW heads. In good condition with no browning. The 9i is brand new in the wrapper as the set didn't include it when I bought them.
4) PX 6.5 4-PW soft stepped once. Play over standard by about 1/2" and come with Z cord grips. Labels and ferrules are still in good shape.
5) KBS C Taper 130 X 5-PW soft stepped once. Also play over standard. No grips or ferrules. Labels are in rough condition.
Spring182
New member
I'm looking to list a set of irons but really have no idea as to how much to ask because of the set makeup.
I have an 8 piece set of Black Dot Ping G20s 6-LW with Reg shafts and stock grips.
Any help would be appreciated!
I have an 8 piece set of Black Dot Ping G20s 6-LW with Reg shafts and stock grips.
Any help would be appreciated!