We've launched the new forums! Read more here

Build Your 2024 Cobra Bag

SuperStroke
TWright971 said:
But man there is so much second guessing with each look at the Cobra website.
Click to expand...
Yep for sure. Also as I read through everyone else’s bag buildouts, it makes me rethink what I have for mine.
 
Wonger said:
Yep for sure. Also as I read through everyone else’s bag buildouts, it makes me rethink what I have for mine.
Click to expand...
It' may be tempting but you already know what works for you. That's a great place to start.
 
Driver DARKSPEED MAX 12* Project X HZRDUS Black Gen4 60 at 44"
Fairway DARKSPEED LS 5W UST LinQ Blue 6F4 -1"
Hybrid DARKSPEED 4, 5, 6 KBS PGI 75R
Irons DARKSPEED 7-PW KBS TGI 85 Stiff 1* Weak
Wedges Snakebite X 48* & 56* KBS Max 80
Supernova 34" Putter

I reserve the right to change irons if Forged Tec's are refreshed.
 
Dark Speed X 10.5 degree Linq blue 60 R
Dark Speed X 3HF Linq Blue 60 R
Dark Speed X 5 Linq Blue 60 R

King Tec Utility 4 KBS 75 R

Dark Speed 5-G KBS TGI 75 R

Snake Bite Raw 54/58 both with the versatile grind KBS $-Taper Regular.

Grandsport-35 3D Printed Putter, 36" everything else per stock.

Cobra Connect Arccos all clubs, as applicable.

All irons and wedges +1/2 inch, 1 degree up.

Wow fun, no second guessing!! For me anyway. Edits made. I guess I did some second guessing! I'm ready!
 
Last edited:
Driver: Darkspeed LS 10.5º, Lin Q Red 5f4
FW: Darkspeed X 3 & 5 wood, LIN-Q M40X Blue 6f4
Hybrid: KingTec 4h, MMT Hybrid 80
Irons: King Forged Tec 5-G, UST 460ESX
Wedges: Snakebite Black 54º Versatile Grind, Snakebite 58º Widelow Grind, KBS Hi-REV 2.0
Putter: Agera CounterBalanced 3D Printed Putter, 38.75", single bend KBS CT Tour Shaft

😞
 
Probably my first bag build of many but based on current available options this sounds like a fun combo bag setup this year and has real potential.

Darkspeed X 9* - LinQ White 6F5
Darkspeed X 3HF - LinQ White 7F5
Darkspeed X 7w - LinQ Blue 7F5
Darkspeed 4i - PX Catalyst 80 X
King Tour 5-7 - DG 105 X
King CB 8-PW 1* strong - DG 105 X
Snakebite Black 50v, 54v, 58v, X 100
Agera CB 3D 38"
 
I'd rock these clubs hard! I would love the Darkspeed, dark head with the LIN-Q RED combo!

Driver - Darkspeed MAX 9.0 w/UST LIN-Q 5F4 Red
FW - Darkspeed MAX 3 w/UST LIN-Q 5F4 Red (no 13.5*?)
Utility - King Tec 2 w/ PX Catalyst 80
Irons - Darkspeed 4 - PW w/ PX Catalyst 80
Wedges - Snakebite X 48* Classic, 52* & 58* Black Versatile w/ PX Catalyst 80 (didn't see stock options in graphite)
Putter - Agera RS-30 3D Printed Putter (33")
 
D: Darkspeed X 10.5/UST Mamiya LIN-Q BLue 6F3
F: Darkspeed X 3HF/UST Mamiya LIN-Q Blue 7F4
H: Darkspeed 4H/TGI 85 S
Darkspeed 5H/TGI 85 S
I: Darkspeed 6-P/TGI 85 S 1* weak
W: SBx 48, 52, 56 and 60/TGI 85S
P: Agera RS-30 3D
 
Redd said:
I believe I have 5-6 bags built at this point, but this one holds as much potential as any. Hopefully will have an even better idea post-fitting at Golf Tec (this Friday):

Driver - Darkspeed X 9.0 w/UST LinQ Red
FW - Darkspeed X 3 w/UST LinQ Red
Darkspeed X 5 w/UST LinQ Red
Hybrid - King Tec 4h w/UST Recoil 460
Irons - Darkspeed 6 - PW w/UST Recoil 460
Wedges - Snakebite X 48 w/UST Recoil 460, Snakebite Raw 50(V)/54(C)/58(C) w/UST Recoil 460
Putter - Agera RS 3D (34")
Click to expand...
Has your Lordship approved this bag yet??
 
Parrot said:
D: Darkspeed X 10.5/UST Mamiya LIN-Q BLue 6F3
F: Darkspeed X 3HF/UST Mamiya LIN-Q Blue 7F4
H: Darkspeed 4H/TGI 85 S
Darkspeed 5H/TGI 85 S
I: Darkspeed 6-P/TGI 85 S 1* weak
W: SBx 48, 52, 56 and 60/TGI 85S
P: Agera RS-30 3D
Click to expand...
Oh, good call on 1° weak. I think I’d want to do that with DS irons also.
 
MtlJeff said:
I like Cobra, i kinda might buy this bag anyway LOL

Driver: Darkspeed X w/ Kaili
3 wood: Darkspeed X w/ Kaili
Hybrid: Darkspeed w/PGI 85
Irons: 2023 King MB full set (non combo) with AMT Tour White
Snakebite Black 54/60
Agera putter if allowed (says limited on CAD side)
Click to expand...
You want an MB 4i? Really?

I think I speak for everyone old or lazy when I say your ambition sickens me. 😆
 
Driver- Darkspeed 9°
FW- Darkspeed 15°
Hybrid- Darkspeed 3 & 4
Irons- Darkspeed 5-GW
Wedges- Snakebite 54° & 58°
Putter- Widesport

I do still want to do the Frankenstein OL set- 4-8 in OL the VL 9-58° … so that’s a possibility.
 
Last edited:
Redd said:
Not just yet.
Click to expand...
Smiles Request Denied GIF by Wentworth
 
That post said:
Oh, good call on 1° weak. I think I’d want to do that with DS irons also.
Click to expand...
I'm playing 2 weak now and would probably do that again but it wasn't an option on the website.
 
This is a fun one! I've hit some new Cobra stuff -- not a ton, but enough to be impressed. A few days ago I got a chance to demo the Darkspeed LS. I thought it would be too low-spin and unforgiving for me ... but paired with the Lin-Q M40X Blue 6F4, I was getting great results. The main thing for me is just moving the heaviest weight to the toe. That would help me keep a lot of low-spin knucklers in play.

My driver swing speed is only 102-103, but I've been fitted in the past into X-flex "blue" type shafts, so 6F5 might be better for me. I tend to go up in flex because I have a fast transition, but I still want a little bit of that mid-soft feel, as opposed to something in the low-low space where the feel is much more linear or soft handle, stout middle/tip.

The other Cobra clubs I've been smitten with are the Cobra King Tour irons. They're so, so good. If I didn't already have my i230s -- which I also love, to be fair -- I'd have bought them by now, because the performance is very, very similar, but the Cobras spin a tiny bit less, fly a few feet higher and feel a little softer. Seriously, such great irons. The CBs and MBs are gorgeous, but the King Tours are so good that I wouldn't need to get away from them in the long irons.

Here's what I'm guessing I'd go with:

Driver: Darkspeed LS 9 degree, Lin-Q M40X Blue 6F5
3 wood: Darkspeed X 15 degree, Lin-Q M40X Blue 7F4
7 wood: Darkspeed X 21 degree, Graphite Design Tour AD DI 8S
5 hybrid: Darkspeed 24 degree, Graphite Design Tour AD DI 95S
5 utility: King Tec Utility 25 degree, Graphite Design Tour AD DI 105S
6-GW: Cobra King Tour irons, 1 weak (29 to 49 degrees), Modus 130S
Wedges: Snakebite X 52 bent to 54 degrees, Snakebite 60 Versatile, Modus 125 Wedge
Putter: Grandsport-35 3D Printed

...And hopefully carrying it all around in an Ultralite Pro+ stand bag, because those look awesome!
 
Darkspeed X 9* - LinQ Blue 6F5
Darkspeed X 3HF - LinQ Blue 7F5
King TEC 2 Utility - MCA MMT hybrid X
Darkspeed OL 4h - MMT hybrid stiff
Darkspeed OL 5-GW - KBS $-taper stiff
Snakebite X 52* - KBS hi rev 2.0
Snakebite 58* versatile grind - KBS hirev 2.0
Grandsport-35 3D printed
 
OldandStiff said:
You want an MB 4i? Really?

I think I speak for everyone old or lazy when I say your ambition sickens me. 😆
Click to expand...

I actually hit a T100 the other day with AMT White higher than my T150 with PX LZ ---Was actually pretty shocked (i know there is 2 degree loft gap) at that

but a 24 degree iron i'm usually good with. I played a PXG 0211 blade with an elevate tour and was OK also

21 degrees i couldn't do it
 
Cobra Darkspeed X 9* UST Mamiya M40X LINQ white 6F4
Cobra Darkspeed FW woods 5-7 UST Mamiya M40X LINQ 7F4
Cobra Darkspeed Irons 5-GW UST Mamiya Recoil 460 ESX
Cobra Snakebite wedges 52-56-60 UST Mamiya Recoil 460 ESX
Cobra Agera RS 3D putter

The Darkspeed lineup is so good!
 
Id be lying if I said this was my first time doing this. The Cobra line up is so good.

Darkspeed Max - 10.5 Degrees - UST LINQ M40xBlue 7F4
Darkspeed Max 3W and 5W - UST LINQ M40xBlue 7F4
Darkspeed 4 Hy - UST Recoil 460
Darkspeed Irons - 5-GW - UST Recoil 460
52* - Snakebite X - KBS Hi Rev Black Steel
58* - Snakebite Black - Versatile Grind - KBS Hi Rev Black Steel
Agera 3D Printed Putter
 
D: Darkspeed LS 8* LinQ White 6F5
3W: Darkspeed LS 13.5* LinQ Blue 6F5
5W: Darkspeed LS 17.5 LinQ Blue 7F5
4h: Tec Hzrdus Gen 4 90 X
Irons: Darkspeed OL 6-PW 1* flat, lofts: 6i: std, 7-9 1* weak, PW: std TT DG 105 X
Wedge: Snakebite X 48* (2* strong), 52*, 60* (2* strong) KBS .610 Stiff
Wedge: Snakebite 60* (2* weak) KBS Hi-Rev
Putter: Agera RS-30
 
This is always fun, some of the shaft choices are guesses, but here goes:

Driver - DARKSPEED MAX 10.5*, UST LINQ M40X Red 5F3
Fairway - DARKSPEED X 3HF, UST LINQ M40X Blue 6F3
Hybrid - DARKSPEED 3H, Mitsubishj MMT Hybrid 70 R
Irons - DARKSPEED 5 - GW, KBS PGI 75 R
Wedges - SNAKEBITE 52* Classic Grind, Graphite R
SNAKEBITE 56* Versatile Grind, Graphite R​
SNAKEBITE 60* Versatile Grind, Graphite R​
Putter - AGERA RS 3D Printed, 34"
 
Driver: Darkspeed X 10.5° LINQ Blue 7F4
Fairway: Darkspeed X 3W LINQ Blue 7F4
Fairway: Darkspeed X 5W LINQ Blue 7F4
Fairway: Darkspeed X 7W LINQ Blue 7F4
Irons: Darkspeed OL 5-SW MMT 125S
Wedge: Snakebite-X 56° MMT 125S
Putter: Agera 3D Printed Putter
 
Last edited:
DARKSPEED MAX 10.5 with MCA KAI'LI BLUE 60
DARKSPEED 3&5W with MCA KAI'LI BLUE 60
DARKSPEED 4&5 HY with Project X Catalyst 60
DARKSPEED 6-GW with Project X Catalyst 60
SNAKEBITE Black 54* & 60* with KBS Hi-Rev 2.0
GRANDSPORT-35 3D Printed Putter

This built one heck of a shopping cart. Goes to show the enormous generosity of Cobra Golf in hosting this experience.
 
Surprised not to see any DARKSPEED X Palm Tree Crew drivers. I drool over that model but am unsure if I could hit it as reliably as the MAX.
 
You must log in or register to reply here.
Back
Top