I'm going to update my watch right now I received the email from Shot Scope this morning
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Cannot wait.yes, the app updates today, and the X5 firmware update with maps will be Monday.
Got it updated and my settings enabled. Curious how this is going to change things on the course!I did the firmware update at about 4:40 AM my time, and it went smoothly, though taking several minutes. No issues. We'll see how it per forms on the course and I will try to use some of the new features, which I doubt I'll use much in the future due to my familiarity with the course. You will want to go into settings as there are some new ones. You can choose the color of the hole map, white, black or green (we'll find out if that can be changed once in "play" mode). There is a "P-AVG Distance" setting you have to enable, and another that says "P-AVG Values". You also have to go into your Bluetooth settings after doing the firmware update and "Forget this device", then pair it again through the app. "The P-AVG Values" will only show after you pair the watch again. You should have an email from Shot scope they sent with detailed instructions.
Did you pair the watch again? If so, the P-AVG distances should show on the watch for your three longest clubs.Got it updated and my settings enabled. Curious how this is going to change things on the course!
You also have to go into your Bluetooth settings after doing the firmware update and "Forget this device", then pair it again through the app.
For iOS users – there is an additional step.
You will need to repair your X5 with the Shot Scope app. Please follow these steps:
- Update your firmware to 2.1.84 following the steps outlined above.
- Once updated, go to your phone settings
- Select Bluetooth
- Tap the i beside your Shot Scope X5
- Select ‘Forget This Device’
- Confirm ‘Forget This Device’
- Switch your X5 off and back on again
- Go back to the Shot Scope App
- Connect your X5 and enter the pairing code