Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Can you explain why you need these things as a paring? I’m interested but confused.
I am more accurate with a very stable and low torque shaft. As far as weak lofts I'm not sure, I have mostly tried modern strong lofts.
low torque is only necessary for the fastest swing speeds. for the rest of us, it’s just for feel.
Sent from my iPhone using Tapatalk Pro
Are you lookin for steel shafts for irons or graphite?
Graphite. I was thinking recoil 110 or 125 may be worth a try. I think ping and srixon may offer more traditional lofted Irons i could try.
Has anyone tried this combination? I basically need a low torque heavier shaft and am thinking the weaker lofts should add spin and height.
low torque is only necessary for the fastest swing speeds. for the rest of us, it’s just for feel.
Sent from my iPhone using Tapatalk Pro
If you’re trying to go stiffest then I’d go catalyst 100 6.5. Stock option for Callaway apex pros
Sent from my iPhone using Tapatalk
How's your dispersion with that shaft?
low torque is only necessary for the fastest swing speeds. for the rest of us, it’s just for feel.
Sent from my iPhone using Tapatalk Pro
I played catalyst 100 6.0 and love them. If I didn’t need help with height into a green I would have them in my apex pros right now without hesitation
Sent from my iPhone using Tapatalk
funny I see this thread as I just got fit yesterday for irons. I launch very high but have low spin. Despite what someone mentioned earlier, the shaft makes a HUGE difference in spin. With a p790 6iron and project x 6.5 I was spinning 4200 (btw ball makes a big difference in spin as well)... speaking of low torque I got fit in to an Accra i110 and srixon z forged head. I was surprised to be fit in a graphite shaft and 20 grams lighter, but lower torque than my project x 6.5. The combo of the Accra shaft and z forged gave me spins between 5200 - 5700.
my goal of the fitting was to gain more spin and with that combo it was incredible to see the difference. Only problem is that set is gonna cost $2400 so I dunno if im going that route yet.
For what its worth my SS with driver is 110+ and while the project x 6.5 feels most comfortable since ive played with it for years, im shocked I fit in a graphite shaft
What shaft are you using now? Is there a trade off in accuracy for height?
low torque is only necessary for the fastest swing speeds. for the rest of us, it’s just for feel.
Sent from my iPhone using Tapatalk Pro
funny I see this thread as I just got fit yesterday for irons. I launch very high but have low spin. Despite what someone mentioned earlier, the shaft makes a HUGE difference in spin. With a p790 6iron and project x 6.5 I was spinning 4200 (btw ball makes a big difference in spin as well)... speaking of low torque I got fit in to an Accra i110 and srixon z forged head. I was surprised to be fit in a graphite shaft and 20 grams lighter, but lower torque than my project x 6.5. The combo of the Accra shaft and z forged gave me spins between 5200 - 5700.
my goal of the fitting was to gain more spin and with that combo it was incredible to see the difference. Only problem is that set is gonna cost $2400 so I dunno if im going that route yet.
For what its worth my SS with driver is 110+ and while the project x 6.5 feels most comfortable since ive played with it for years, im shocked I fit in a graphite shaft
ball does make a difference and is often overlooked.
Did you happen to try that shaft in the p790 head? Because I'd be curious how different the spin numbers would be. Going off head design of the two you mention, p790 is a low spin head and by nature the Z Forged will give you more.
Did you try the Accras against any other graphite offerings ?
low torque is only necessary for the fastest swing speeds. for the rest of us, it’s just for feel.
Sent from my iPhone using Tapatalk Pro
unfortunately not no. In terms of stiffness and low torque, I dont think it gets stiffer than those shafts
unfortunately not no. In terms of stiffness and low torque, I dont think it gets stiffer than those shafts