What are you building? (Club style)
- Staff
- #352
That would make a pretty good thread if you've documented it all.
dcbrad
locked and reloaded
I need to see some pictures of these. I have a 17° trimetal sitting in my basement, been looking around at shaft pullers on line, and I really would like to tinker with it.
- Staff
- #355
B-rad I just moved all my phone pics to my laptop or I'd post one via tapatalk. When I log onto that machine later I will put a couple up though. Interesting club and it takes a special fitting called a bushing to fit modern shafts in there. You can buy them from Mitchell for around $1 each.
kc720
Active member
Just got done building these:
Was going to take them out tomorrow with milehighgolfer but work wont allow
if im lucky ill get a range session in the evening if no rain
Was going to take them out tomorrow with milehighgolfer but work wont allow
if im lucky ill get a range session in the evening if no rain
golfinFF
Active member
Just got done building these:
Was going to take them out tomorrow with milehighgolfer but work wont allow
Well hello there ladies!!!!
golfinFF
Active member
Those should be stunning and awesome
That looks so sick!
Picked up my grips today and was finally able to finish my first re shaft. It went well. We will see how it goes when I take them to the range tomorrow
Sent from my iPhone using Tapatalk
I didn't take before, during, but these are 2 quick after pics.
2 quick ones of the irons and wedges. I got Fourteen FH1000 and Raw Rm-12. The irons came with Tour Concept X1 shafts. Too much for me. i reshafted with C Taper Lite, regular flex. The wedges came with Dynamic Gold Wedge Flex. I added a C-Taper Lite to the 52. I installed matching ferrules on all
2 quick ones of the irons and wedges. I got Fourteen FH1000 and Raw Rm-12. The irons came with Tour Concept X1 shafts. Too much for me. i reshafted with C Taper Lite, regular flex. The wedges came with Dynamic Gold Wedge Flex. I added a C-Taper Lite to the 52. I installed matching ferrules on all
- Staff
- #365
Shaft length is the easiest way, but of course that only works if you're going to play longer shafts. The nice thing about the MCI's (and many other high end graphite options now) is that the weight isn't way off, so you can either get something comparable or even slightly higher, which is a good thing in my world.
With steel I just use tip weights. With graphite you can buy tip weights too, but I'd probably just lean towards lead tape for ease of use.
So I picked up a set of Tour V's to throw in my Apex's but I was unable to pull the shafts. Never had this issue before. Tried all day. To make sure I wasn't going crazy I pulled a Bio Cell head with no issues. Guess I will bring them to my club guy and have him pull them
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Six4three5
Tour Star...Layin' Up!
All done!!
Sent from my iPhone using Tapatalk
That's an awesome setup Adam. I absolutely love the look of the recoils.
adamw238
New member
- Joined
- Dec 21, 2012
- Messages
- 4,316
- Reaction score
- 0
- Handicap
- 9.1
Thanks! They play even better. I've gotten a few rounds in and I'm really happy with the results.
Sent from my iPhone using Tapatalk
- Staff
- #369
Heat gun or torch?
kc720
Active member
Was practicing on my eye line putting mirror and i noticed my eyes are not over the ball. Chopped my cortino 2 to 33" (too bad i had to cut off the pretty iomic grip) so installed usa superstroke 1.0 for ryder cup week! Looks good and now my eye is over the ball!!!
kc720
Active member
My latest project:
J40 driver getting diamana w series
J40 4w (thanks Ryan!) getting elements chrome
J40 driver getting diamana w series
J40 4w (thanks Ryan!) getting elements chrome
Quick advice needed: I bought a Tour Green shaft with a optifit adapter on it a little while back. Anyway, the bottom cog of the adapter is stuck in the "S" position. This isn't a big deal, but are there any tricks to get it unstuck that anyone knows about? I don't see any glue build up, so I'm not sure why it is stuck, but it obviously takes away a lot of the customizable options, which is disappointing.