Just finished pulling the AMT Red steel shafts from my T200s and have prepped the Recoil Dart shafts I got from @That post last year. Just going to let the heads cool down and then we'll mix up some epoxy!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Awesome looking setup James! I don't know if I would ever leave the garage if I had a setup like that.View attachment 9243343View attachment 9243344View attachment 9243345View attachment 9243346
Cleaned up and more organized. Can actually get to all the tools I need to now, with ample space to build.
ProjectorAwesome looking setup James! I don't know if I would ever leave the garage if I had a setup like that.
What is the ramp looking device between the hitting mat and the main cage of the simulator?
Of course it would be the projectorProjector
I’m thinking about changing it to one mounted off of the enclosure, I don’t hit it, but the kids absolutely obliterate it ha haOf course it would be the projector
Ok....... where do I find that grip Rip tool?????? Must Have....Finally got my little vice installed too, no, it isn’t the best but it works for what I need and it’s low profile.
View attachment 9243463
It holds my extractor perfectly well:
View attachment 9243465
And most fun for me is that the Grip Rip is now usable @JB !!!!
View attachment 9243464
Dallas Golf used to sell them, I’m not sure anymore though, it’s been in a drawer for a whileOk....... where do I find that grip Rip tool?????? Must Have....
I've found lots of videos and a link to DallasGolf but so far nothingDallas Golf used to sell them, I’m not sure anymore though, it’s been in a drawer for a while
Might be discontinuedI've found lots of videos and a link to DallasGolf but so far nothing
Golfworks had them for years. Not sure anymore.Ok....... where do I find that grip Rip tool?????? Must Have....
Might be discontinued
I did a set for a friend this weekend and the tape did not want to come off the steelfiber shafts. Looks like it has been discontinued, you can buy replacement blades from golfworks but the device doesn't look to be available. Even tried ebay.Golfworks had them for years. Not sure anymore.
Still use mine once a week probably.
That’s a bummer! Good looking out though on the refill info! I need to grab a couple while I can!I did a set for a friend this weekend and the tape did not want to come off the steelfiber shafts. Looks like it has been discontinued, you can buy replacement blades from golfworks but the device doesn't look to be available. Even tried ebay.
Great setup BTW @Jman !
Not that big a difference if you sand tip. Only needs to be 3/8-5/8” of tapered portion. Can always stick the shaft in and spin. The glossy part needs sanded further.Ugh… what was listed as a .370 hosel was most definitely not. Was hoping to build a utility iron short for giggles but now need to source a .355 shaft.
I guess I could go to town with a sander but that sounds like work, not enjoyable hobby time
welp, a .355 shaft I had laying around also won’t fit. I guess even though it looks clean I need to work on the hosel someUgh… what was listed as a .370 hosel was most definitely not. Was hoping to build a utility iron short for giggles but now need to source a .355 shaft.
I guess I could go to town with a sander but that sounds like work, not enjoyable hobby time
welp, a .355 shaft I had laying around also won’t fit. I guess even though it looks clean I need to work on the hosel some