- Joined
- Feb 10, 2012
- Messages
- 54,303
- Reaction score
- 19,735
- Location
- South Georgia
- Handicap
- Cold Temps
Hit this today, and !!!!!!
Need to give it another go to make sure it's real
Don't overthink it. Just buy it and hit straight bombs.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Hit this today, and !!!!!!
Need to give it another go to make sure it's real
Did not have my best driver swing today but was still able to hit 7/11 fairways with the EXS. Interestingly enough, the 4 missed fairways were struck in the middle of the club face and I just wasn't able to deliver a square club face to the ball. Only one of the 7 fairways hit were struck in the middle of the club face with 5 on the toe end and 2 towards the heel.
Put an adapter on an LA Golf Shafts White Tie today so hope to give that a go on Sunday. Going to set that one up a little shorter at 45" than the shaft I currently have in the driver.
1st round with the White Tie in the EXS driver was successful. That combo enabled me to get my previous normal right to left ball flight back which I like. Before the round, I switched the heavier weight (9 gram) to the heel and the lighter one (6 gram) to the back. Going to switch them back before today's round to see what that gives me. Also put a 2 gram strip of high density lead tape over the carbon fiber in the toe to get the swing weight up to what it was the the original, slightly longer shaft.
Sent from my SM-S727VL using Tapatalk
Nice Sox, def sounds like a good debut for that setup!
Hit this today, and !!!!!!
Need to give it another go to make sure it's real
1st round with the White Tie in the EXS driver was successful. That combo enabled me to get my previous normal right to left ball flight back which I like. Before the round, I switched the heavier weight (9 gram) to the heel and the lighter one (6 gram) to the back. Going to switch them back before today's round to see what that gives me. Also put a 2 gram strip of high density lead tape over the carbon fiber in the toe to get the swing weight up to what it was the the original, slightly longer shaft.
Sent from my SM-S727VL using Tapatalk
Will keep doing it until I find that unicorn! HahaLove your tinkering process.
Sent from my iPhone using Tapatalk
Will keep doing it until I find that unicorn! Haha
Sent from my SM-S727VL using Tapatalk
Tinkering done. At least until I have a couple of bad driving rounds...haha. Settled on the Accra shaft in my signatures, 9 gram weight in back and 3 gram weight in heel. Plays at 45" with a swing weight of D3.
Nice! I'm no where near done tinkering. Contemplating ordering the weight kit from TEE. I think I'd like a bit heavier of a head. All those weights might put me into tinker overload though....
All I can do is think dream and wish at this point thanks to snowmageddon hear near seattle. Can't even make it to the range... which is probably closed anyway. :sad::sad:
I look forward to how that goes for you, I sort of wish I hadn’t cancelled my order.
Thanks. I'm thinking maybe just ordering the 14g weight and plugging it in at the heel and putting the 9g at the back. That would increase the head weight 11g (not sure about swing weight) and in theory still give me a little bit of draw bias. Crazy? I like it heavy.
Rule is, for every 2g of head weight w nothing added to the butt end, it’s 1 point increase.
Ok, good to know thanks. Being that my mid size wrap grips are already about 10g heavier than average, adding weight to the head would pretty much bring the swing weight back towards standard. In theory?
Ok, good to know thanks. Being that my mid size wrap grips are already about 10g heavier than average, adding weight to the head would pretty much bring the swing weight back towards standard. In theory?
I think using heavier grips tricks the swing weight system. In my experience the club does not feel that different because the weight is at your hands. Thoughts?
DT
Heavier grip is still moving the balance point up the shaft away from the head and will reduce the swing weight.
I'm not disputing that. But, if you go from D2 to D0 only due to a heavier grip does it really FEEL any different than it did with the lighter grip? I have not observed a difference although I may not have much sensitivity.
DT
I look forward to how that goes for you, I sort of wish I hadn’t cancelled my order.
You hadn't cancelled the weight kit or the EXS order?
I regret not getting the weight kit as well. Somehow the fts system works. Now I want to achieve higher ball speed and neutral flight path.
Sent from my iPhone using Tapatalk
Yep, I cancelled it, but it’s because in the end as good as the driver is (and it is good) the RollFace is not good for me and my swing, much like TwistFace.