Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
That's not right, they are supposed to put a new grip on everything that leaves the place.well unfortunately the set from cpo is trash. i’ll be sending them back. heads are beat to hell. nicks and dings everywhere. several faces scratched with significant wear in the grooves. grip material coming off in my hands. pretty disappointing. i waited on hold for awhile trying to get a return authorization and had to hang up. called back and the office was closed. will try again tomorrow.
I have had that problem in the past with another OEM but my Callaway stuff has been perfect. I have heard that leaving them in a hot car and washing them with hot water can cause this problem but I do not know if its true.Anyone having issues with ferrules coming loose? Noticed my pitching wedge ferrule is coming loose. Not a huge deal and easy to fix, just wanted to throw it out there
That's not right, they are supposed to put a new grip on everything that leaves the place.
I have a bunch of CF19 7s, but none of them have original ferrules or are standard length, which I think is 37. From the bottom of the ferrule where it meets the head to the end of the grip, at 1/2" over standard, should measure just about 35 1/4" I think. Assuming a 1/2" to 3/4" stock ferrule (been a while on that too, and I don't have a Cally 19 build in tact to reference) it sounds a little bit short, but it could depend on the ferrule and grip and how it was measured.Anyone willing to measure their 7 iron for me? I measured mine from right at the top of the Ferrule to the end of the grip and it's 34 3/8". I'd like to know for sure if this club is 1/2" longer as I requested. I don't know of another way to measure that would be consistent. Thanks in advance!
Mine is std. length and measures 33 7/8" from the top of the ferrule to the end of the grip. I think yours are exactly 1/2" longer than mine.Anyone willing to measure their 7 iron for me? I measured mine from right at the top of the Ferrule to the end of the grip and it's 34 3/8". I'd like to know for sure if this club is 1/2" longer as I requested. I don't know of another way to measure that would be consistent. Thanks in advance!
regulars were my gamer before the grandaddy. i really enjoyed them. i missed left a lot with those clubs for some reason but they were really awesome.
I struggle with missing left a bit with my Apexs also. I do think it is my swing but I do miss left with them more than I did my i200s. Totally different shafts though so it is hard to completely blame heads.
my previous setup was very similar, but had a slightly heavier shaft. i’m not sure that was the reason though. i did enjoy the irons, but arccos identified a higher % of left misses with the apex.
Thanks for checking! I just wanted to be sure.Mine is std. length and measures 33 7/8" from the top of the ferrule to the end of the grip. I think yours are exactly 1/2" longer than mine.
Based on my experience with the irons and what I know about my game I am pretty sure it is the ironsThese irons are making their way up my list of all time favourite irons sets. Either I’ve stepped my game up or these irons are helping me out . No questions ask just keep performing
I can run with that. You seen my game Frank I’m not a good golfer. Need all the help I can get. Theses irons are my workhorses right nowBased on my experience with the irons and what I know about my game I am pretty sure it is the irons
These irons are making their way up my list of all time favourite irons sets. Either I’ve stepped my game up or these irons are helping me out . No questions ask just keep performing
Same here think if I get fitted and tweak the lofts and lie angle it could be that much better. Have yet to have a fitting so it could only improve my gameTotally agreed. Got fitted for another set as I want to move to graphite, but these irons have really been fantastic for me. I'll be holding onto them for a while I think. Need to get them bent a little, but no plans to sell these short term.
Anyone willing to measure their 7 iron for me? I measured mine from right at the top of the Ferrule to the end of the grip and it's 34 3/8". I'd like to know for sure if this club is 1/2" longer as I requested. I don't know of another way to measure that would be consistent. Thanks in advance!
I feel this. I'm not sure I'll ever turn off that new listing alert.Smoke Pros are among the billion golf things I ponder every day
This is correct, Callaway uses specific collared ferrules to make to allow the hosel on the non pros to fit .355 without shims as well. It’s all in the way the hosel is bored out. There are several sites that sell callaway collared iron ferrules.