Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Where is the best place to buy iron shafts? Golfworks?
I apologize for not being more elaborate. I have two ideas for two different builds. I have a Black 75 6.5 coming in a G410 Plus from Ping. Full length 45.25". I am thinking 65 6.5 for the white. I plan to tune the black a little bit with length adjustments. Ideally I would like two styles for the different courses I play here. With one White shaft setup for Long Drive.
Numbers for the Black were 280 carry and 300 total on trackman during the fitting but that was my first time swinging an x flex and a much heavier shaft than my stock XR16 in S flex.
I just built a shaft for that Callaway using a Rogue Silver 110 MSI 70 2.8X. I finished it at 44.5" total length and am very pleased with the results at the range so far. Field test tomorrow
So, after a slight "mishap" last night I'm in the market for a new shaft for my Rogue driver. I was using the Project X Evenflow (6.0, 65g) that it came with but that shaft is no more. I'm not sure what shaft I want to go with now, I am considering the UST Proforce V2 (black) due to price and known quality. I'm still trying to find my driver swing, so I'm not 100% sure what the best shaft for me will be going forward. I'm also not opposed to just replacing the Evenflow with another one.
I guess I have two questions:
1. Aside from Callaway Pre-owned, are there any good sites for ordering shafts with the adapter already installed?
2. If you were to recommend a good "catch-all" driver shaft, which would it be?
So, after a slight "mishap" last night I'm in the market for a new shaft for my Rogue driver. I was using the Project X Evenflow (6.0, 65g) that it came with but that shaft is no more. I'm not sure what shaft I want to go with now, I am considering the UST Proforce V2 (black) due to price and known quality. I'm still trying to find my driver swing, so I'm not 100% sure what the best shaft for me will be going forward. I'm also not opposed to just replacing the Evenflow with another one.
I guess I have two questions:
Email Danny and ask him what he would suggest. He might also have some older shafts laying around he can build up for you. He won’t mind I promise, he wants all his ShaftUp guys playing as good as they can
1. Aside from Callaway Pre-owned, are there any good sites for ordering shafts with the adapter already installed?
Ebay. Search for what you want and add Callaway to the end. There will probably be a bunch of stock offerings up for bid/sale.
That's where I find the best deals. Sometimes you have to be patient though. If you can't driver shafts are pretty easy to install adapters on and butt trim. I've trimmed with a PVC hacksaw before but highly recommend a dremel cutting wheel if you have one.
2. If you were to recommend a good "catch-all" driver shaft, which would it be?
This is a really tough question... It's so dependent on your swing & preferred feel. I will say that the Synergy shaft they shipped with the Rogue last year is a solid pairing. I would probably go up to a 60g but that's all about preference and what weight works best for you.
Email Danny and ask him what he would suggest. He might also have some older shafts laying around he can build up for you. He won’t mind I promise, he wants all his ShaftUp guys playing as good as they can
@jdtox I think I have a set of Modus 120 x-stiff shafts in a set of heads that I need to pull as they are too much for me.. I'm on the hunt for Modus 105 stiff shafts to go in themSomething lower launching than my $taper. Maybe Modus 120 or TourV 110. Or maybe I just need a new golf swing haha
Something lower launching than my $taper. Maybe Modus 120 or TourV 110. Or maybe I just need a new golf swing haha
I don’t think you’ll see the difference you hope from
The $ to the 120, IME at least
Thanks. you’ve hit way more shafts than me I’ll trust your judgment. Actually entertaining the possibility it’s me not the shaft haha
As far as price goes, I've been installing alot of the Matrix Black Tie shafts lately. They don't make them anymore, but you can pick up brand new uncut shafts on Ebay for like 50 bucks. Just look up black tie 60m4.So, after a slight "mishap" last night I'm in the market for a new shaft for my Rogue driver. I was using the Project X Evenflow (6.0, 65g) that it came with but that shaft is no more. I'm not sure what shaft I want to go with now, I am considering the UST Proforce V2 (black) due to price and known quality. I'm still trying to find my driver swing, so I'm not 100% sure what the best shaft for me will be going forward. I'm also not opposed to just replacing the Evenflow with another one.
I guess I have two questions:
1. Aside from Callaway Pre-owned, are there any good sites for ordering shafts with the adapter already installed?
2. If you were to recommend a good "catch-all" driver shaft, which would it be?
So, after a slight "mishap" last night I'm in the market for a new shaft for my Rogue driver. I was using the Project X Evenflow (6.0, 65g) that it came with but that shaft is no more. I'm not sure what shaft I want to go with now, I am considering the UST Proforce V2 (black) due to price and known quality. I'm still trying to find my driver swing, so I'm not 100% sure what the best shaft for me will be going forward. I'm also not opposed to just replacing the Evenflow with another one.
I guess I have two questions:
1. Aside from Callaway Pre-owned, are there any good sites for ordering shafts with the adapter already installed?
2. If you were to recommend a good "catch-all" driver shaft, which would it be?
Aww... you're da bestest!Did you find a shaft already? If not then send me a pm and I’ll send you one.
Sent from my iPhone using Tapatalk
Did you find a shaft already? If not then send me a pm and I’ll send you one.
Sent from my iPhone using Tapatalk
I really need to get somewhere to try out iron shafts. Feel like I keep reverting to Recoils because I think they will work for me.... and then I get them and struggle.
The Rogue iron shafts I have right now, I like, but still don't know if they are right for me. There just isn't anywhere local that I can get in and try stuff out and actually analyze things. Probably overthinking too much.