Let's see if you get fit into graphite! 4-5 mph isn't anything to sneeze at. That's awesome!
I play graphite now and will continue to! I wanted to have an idea of what worked to be prepared.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Let's see if you get fit into graphite! 4-5 mph isn't anything to sneeze at. That's awesome!
I would be interested to hear how they compare to Steelfibers. I like the reliability of the SF but I don't hit the SF high enough or with enough spin.
I have played both MMT & SF (current) and I would say the MMT might 10-15% higher although I don’t have a hard time elevating. The MMT’s are comparable to Recoils IMO.
I believe they do. I called Ping customer service recently and asked about re-shafting and they quoted MMT 125TX at around $136 per club for the re-shaft/re-gripI was kind of surprised Ping doesn’t offer these as an upgrade option
Here’s my dilemma… maybe you guys can help me out.
First off I don’t like the 105s weight so that’s out. My 6 iron swing speed is 89 mph average transition. I like heavier in my irons.
I’ve hit the MMT 125TX from my fitting set and hit it well, loves to go straight and height is fine. Thing is, I know TX is really too much for me to be honest.
So that brings up the real dilemma… 105 TX or 125S? I like the weight of either one. Lighter might get me a few yards, no idea. Does the 105TX play stiffer than the 125S? I’m thinking from reading this thread that it is. Soft stepping the 105TX might not really make a big difference either. But softstepping the 125S once might be good… might also be thinking too much on that last statement and 125S straight in would be the way to go.
thoughts? There’s 11 pages here if people with MMT expertise so let’s hear it. Thx!
You are looking at profiles that I have never swung. I don’t hit x stiff and I no longer hit iron shafts in the 120 gram category. I have a set of irons with 105 S and might be able to extrapolate with something helpful. To me, the MMTs play less stiff than SteelFibers. However, they feel more like SteelFibers on the spectrum than like Recoils, for comparison. They are very stable shafts. I am actually hitting MMT 80s right now and I have never liked a shaft that is that light, but these hold up super well.Here’s my dilemma… maybe you guys can help me out.
First off I don’t like the 105s weight so that’s out. My 6 iron swing speed is 89 mph average transition. I like heavier in my irons.
I’ve hit the MMT 125TX from my fitting set and hit it well, loves to go straight and height is fine. Thing is, I know TX is really too much for me to be honest.
So that brings up the real dilemma… 105 TX or 125S? I like the weight of either one. Lighter might get me a few yards, no idea. Does the 105TX play stiffer than the 125S? I’m thinking from reading this thread that it is. Soft stepping the 105TX might not really make a big difference either. But softstepping the 125S once might be good… might also be thinking too much on that last statement and 125S straight in would be the way to go.
thoughts? There’s 11 pages here if people with MMT expertise so let’s hear it. Thx!
Here’s my dilemma… maybe you guys can help me out.
First off I don’t like the 105s weight so that’s out. My 6 iron swing speed is 89 mph average transition. I like heavier in my irons.
I’ve hit the MMT 125TX from my fitting set and hit it well, loves to go straight and height is fine. Thing is, I know TX is really too much for me to be honest.
So that brings up the real dilemma… 105 TX or 125S? I like the weight of either one. Lighter might get me a few yards, no idea. Does the 105TX play stiffer than the 125S? I’m thinking from reading this thread that it is. Soft stepping the 105TX might not really make a big difference either. But softstepping the 125S once might be good… might also be thinking too much on that last statement and 125S straight in would be the way to go.
thoughts? There’s 11 pages here if people with MMT expertise so let’s hear it. Thx!
At my age I’ve been able to maintain club head speed. I’d like the clubs to last a few years like you mentioned. I hit some with the ctaper lite 110 g and a px IO at 115. Both were good so that’s the bortrom end of weight for me. I have a set of ctaper s+ right now at 125 g and love the way they feel. When I hit my friends ctaper s… 5 grams light and not as stiff it’s a bit better.I've tried the 125s, 125tx, and 105tx. I've settled on the 105tx.
I found that the 105tx did play a little stiffer than the 125s which for my swing helped me with all direction dispersion - my dispersion circle got even tighter.
I was worried about the 105tx weight but at 113 they werent too light. I have found that I really liked this weight and flex. The 125tx was very playable, im just getting older and wanted to keep this set for 3-4-5 years. Although in true golf internet problems, have a set of axiom coming in to try
In my testing TX is noticeably stiffer than Stiff regardless of weight category so if 125TX was too much, 105TX will likely be the same. I’d go 125 Stiff straight in could work or if you liked the stiffer 125TX when you tested it but don’t want to go TX, the 125 Stiff hard stepped once if you need weight and a bit stiffer shaft.Here’s my dilemma… maybe you guys can help me out.
First off I don’t like the 105s weight so that’s out. My 6 iron swing speed is 89 mph average transition. I like heavier in my irons.
I’ve hit the MMT 125TX from my fitting set and hit it well, loves to go straight and height is fine. Thing is, I know TX is really too much for me to be honest.
So that brings up the real dilemma… 105 TX or 125S? I like the weight of either one. Lighter might get me a few yards, no idea. Does the 105TX play stiffer than the 125S? I’m thinking from reading this thread that it is. Soft stepping the 105TX might not really make a big difference either. But softstepping the 125S once might be good… might also be thinking too much on that last statement and 125S straight in would be the way to go.
thoughts? There’s 11 pages here if people with MMT expertise so let’s hear it. Thx!
Still toying around in my mind. I just sold off my TAylormade P7TW combo set with the ctaper S+. I luckily re-stumbled onto your reply… maybe it’s a sign. I’ve just hit the 125 g c taper so straight, and now that they are gone I have my TM demo P7TW with the s400 tour issue and it also goes dead straight. Height it fine too.In my testing TX is noticeably stiffer than Stiff regardless of weight category so if 125TX was too much, 105TX will likely be the same. I’d go 125 Stiff straight in could work or if you liked the stiffer 125TX when you tested it but don’t want to go TX, the 125 Stiff hard stepped once if you need weight and a bit stiffer shaft.
The bigger question is how will you perform with a 105TX @ 113G versus 125 Stiff @ 124G?
My gut says 125 Stiff hard stepped once.
Going to be an interesting shootout this fall, as I go with the mmt 95s for the first time in my new Alex pRo/CB, vs the KBS Tour lite that I just built in the rogue st pro heads.
I will say, I really really liked the 85r mmt